How long does a snowmobile clutch last?
How long does a snowmobile clutch last?
With proper maintenance, a snowmobile clutch will typically last between 5,000-10,000 miles before it needs repairs or replacement. If you don’t perform regular maintenance to your snowmobiles primary or secondary clutch, you can expect them to last between 3,000-5,000 miles before you run into issues.
How does a primary snowmobile clutch work?
The primary clutch sits on the engine crankshaft. A pressure spring holds the primary’s two halves apart when the engine rpm is low. As the engine begins to accelerate, the clutch weights generate enough centrifugal force to close the clutch, allowing the belt to move freely and transmit power.
Should you lubricate snowmobile clutch?
that is correct, you do not lubricate a snowmobile primary clutch. It is considered a “dry clutch” on an atv, you use a quality grease to lube the rollers but that is not done on a snowmobile.
How often should snowmobile clutches be rebuilt?
You should be good for at least 4000 miles. You may need to change the bushings on the weights. when it does come to be time to rebuild the clutch it is much easier to just purchase a new clutch than to rebuild it. Probably cheaper in the long run as well.
What can I use to clean my primary clutch?
It’s best to rinse the clutches with warm water, as this is the most thorough way to flush out the metal debris and belt residue. If that isn’t possible, spray the clutch with brake cleaner to flush out the debris and then wipe it with a clean cloth.
What can I use to clean my CVT clutch?
Take a new green Scotchbrite pad and lightly etch both halves of each clutch. Make sure you get inside the driven clutch as deep as you can. Pour a tablespoon worth of denatured Alcohol on a clean paper towel. Wipe the clutch halves clean then install your washed belt.
What is the part number for the Arctic Cat drive clutch?
Genuine Arctic Cat part number 0100-701. St. Lawrence part number 0206. Fits the more St. Lawrence drive clutch that was used on the 1972 Cheetah 399cc model. Will fit other brands of snowmobiles that use the same drive clutch.
How many miles on a 2004 Arctic Cat T660 sled?
For sale is a Parts clutch removed from 2004 Arctic Cat T660 Sled only had 1438 miles on it Outer portion of clutch sheeve is broken As is no returns on this item. Basic shipping is free. Upgrade to faster service for only.99
Should I remove the one way bearing on my Arctic Cat?
Arctic Cat issued an advisory regarding the one way bearing. If you use the machine for plowing, or other heavy loading (Bigger Tires!), it is advised that you remove the bearing. I’ve had mine removed for close to two years, and actually like it better!
What is the part number for the Arctic Cat centrifugal governor?
Vintage Arctic Cat NOS St. Lawrence drive clutch centrifugal governor. Genuine Arctic Cat part number 0100-701. St. Lawrence part number 0206. Fits the more
