Are Pro Comp Shocks good?

Are Pro Comp Shocks good?

These Pro Comp shocks are less firm, and results in a good ride on the highway. For the price, I believe the Pro Comp 9000 ES shock is a decent performer. Fit was perfect on the lower perch, but the supplied upper mount (three choices supplied per shock) was a compromise, and not a perfect fit.

Do shocks come with bushings?

Most shocks will come with fresh hardware, locknuts and rubber bushings, which I recommend replacing even if the old ones look fine. Remove the upper bolt from the shock’s central damper rod and remove the shock from the vehicle. Important: Now you can check the upper bearing, if you have one, for wear.

Should shock bushings be greased?

The new bushing should drive its way into the shock eye, pushing the old one out as it does so. Don’t apply any grease or lube to the bushing surface – it’ll just cause the coating to break down and flake off.

Can shock bushings be replaced?

Often made from steel with a nylon / PTFE coating, the bushings inside the eyelets of your rear shock are designed to wear over time, and thus – they are an easily replaceable part with the right tools and a little care. …

Can you use PB Blaster on bushings?

Did the lollipop bushings on my E30 with it. Whatever you do, don’t use PB Blaster… it makes rubber glue.

Do you need to grease bushes?

For traditional bushing materials like bronze, lubrication is simply a requirement of the material. Lubrication requirements mean not only more maintenance but more muck.

Are shock bushings universal?

The rougher the use, the faster this occurs. Polyurethane shock eye bushings from Daystar hold their shape much longer than rubber with prolonged use and also hold up against the elements like road salts, grime, and vehicle fluids which can destroy rubber….Daystar Universal Shock Bushings.

Can I replace shock bushings?

author