Common questions

How do I setup my Synology Network?

author 0

How do I setup my Synology Network?

To configure network interface settings:

  1. Go to Server Network Information and click Configure Server Network.
  2. Choose Use manual configuration and manually enter the following information for each or either server: IP address. Subnet mask. Gateway. DNS Server.
  3. Click OK to continue.
  4. Click Apply to save the new settings.

How do I connect my Synology NAS to my computer?

Overview

  1. Open a Windows Explorer window and go to Computer.
  2. Click Map network drive.
  3. On the Map Network Drive window, choose a drive letter from the Drive drop-down menu.
  4. In the Folder field, enter the server name of your Synology NAS and shared folder name preceded and separated by backslashes.

How do I connect to Synology NAS directly?

If you want to connect your NAS directly, you can do it. Set up manual IP on your PC and NAS with a one in the same IP range. Than use Synology finder app or type IP in the address bar and it’s done. Maximum speed for regular network cable is 1Gb/s which is around 115MB/s in real life.

How do I initialize a Synology drive?

To add a drive to a storage pool:

  1. Power off your Synology NAS.
  2. Insert a new drive into an empty drive slot.
  3. Power on your Synology NAS and launch Storage Manager.
  4. Go to the Storage Pool page and select the storage pool you want to expand.
  5. Select the drive you want to add from the list.

How do I connect my Synology NAS to my router?

If you are required to manually set up Synology NAS device’s connection to the router, do the following:

  1. Choose your router from the Router drop-down menu.
  2. Set up protocol and port of your router.
  3. If your router requires a custom account, tick Use custom account and fill in the Account and Password fields.

How do I connect my NAS?

Business Storage Windows Server NAS – How to Access with Remote Desktop

  1. Press the Windows key (
  2. Press the Start button.
  3. In the Search files and folders field, type the following:
  4. Open the Remote Desktop Connection application.
  5. Enter the IP address of the NAS device, then click Connect.
  6. For the user, enter: Administrator.

How do I format a hard drive to a Synology NAS?

Steps to run a Secure Erase: In DSM, go to Storage Manager > HDD/SSD. Select a drive and click Action > Secure Erase.

How do I Reset my Synology router?

When your Synology router is powered on, press and hold the reset button for 30 seconds. While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

How to setup Synology ds918?

Use the LAN cable to connect the DiskStation to your switch,router,or hub

  • Connect the AC adapter to the power port of the DiskStation.
  • Press the power button

    • How to setup OpenVPN on Synology NAS?

    Open the Package Center and Install the VPN Server application.

  • Open the application and navigate to the OpenVPN section.
  • Enable OpenVPN Server.
  • Navigate to the privilege section and ensure that the user account that you’d like to connect to the VPN with has permission for OpenVPN.

    • How to SSH into Synology NAS?

    How to SSH into a Synology NAS? Login into your NAS then go to Control Panel / Terminal & SNMP / Terminal tab – Check Enable SSH service and set port 22 then click Apply. Follow the instructions in the image below. Note: It is strongly recommended not to use port 22, but to change it to something else, between port 49152 and port 65535.

    author

    Back to Top