What is bulkhead framing?

What is bulkhead framing?

Bulkheads are found in many residential homes. Building a bulkhead in order to frame around ductwork involves building a wooden frame (known as a soffit) and then drywalling over it. When complete it should look like an extension of your ceiling.

Is metal framing cheaper than framing?

Cost-effective: While never as cheap as wood, steel studs are now only about 30-percent more expensive than wood studs. Lightweight: Steel studs are lighter to carry and store than wood because they are hollow.

What are bulkheads in construction?

1 : an upright partition separating compartments. 2 : a structure or partition to resist pressure or to shut off water, fire, or gas. 3 : a retaining wall along a waterfront.

How much does a bulkhead cost?

Bulkhead or seawall cost per foot. The cost to build an ocean bulkhead or lake seawall is $150 to $600 per linear foot. A steel, vinyl, or concrete seawall costs $200 to $600 per linear foot. A wood seawall costs $150 to $500 per linear foot.

How are bulkheads built?

Bulkheads are normally constructed in the form of a vertical wall built in concrete, stone, steel or timber. The concrete, steel or timber walls can be piled and anchored walls, whereas the concrete and stone walls can also be constructed as gravity walls. Example of bulkhead structure constructed by Gabion mesh boxes.

What are the different purpose of the bulkheads?

Bulkheads in a ship serve several purposes: increase the structural rigidity of the vessel, divide functional areas into rooms and. create watertight compartments that can contain water in the case of a hull breach or other leak.

What is a van bulkhead?

A Van Bulkhead is also referred to as a partition. The bulkhead is located behind the driver and passenger seats in a van, and separates them from the cargo area. A van bulkhead is made from various materials, such as steel or wire.

How much weight can metal studs hold?

The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.

What is the function of a bulkhead?

Bulkheads are normally smaller than seawalls , as their primary function is to retain fill at locations with only limited wave action, and not to resist coastal erosion. A bulkhead must, of course, be designed to resist erosion caused by the mild to moderate wave climate at a specific site.

What is a bulkhead construction?

A stairway or basement bulkhead is an enclosed construction that connects an exterior level, such as in a yard or driveway, to an underground part of the house, such as a basement or root cellar. The walls, ceiling and staircase of this structure are typically made from concrete or stone.

What is a bulkhead ceiling?

Bulkhead ceilings are an additional ceiling which protrudes from the main ceiling. They are often a box shape but can be domed. A bulkhead ceiling is often installed for aesthetically pleasing reasons.

What is bulkhead line?

Bulkhead line is an officially set line along a shoreline, usually beyond the dry land, to demark a territory allowable to be treated as dry land, to separate the jurisdictions of dry land and water authorities, for construction and riparian activities, to establish limits to the allowable obstructions to navigation and other waterfront uses.