How do I get my jam wireless speaker to work?
How do I get my jam wireless speaker to work?
Pair your device with the unit by selecting HMDX Jam from your Bluetooth listings on your device or selecting YES. If prompted, enter “0000” as the passcode. 5. Press play on your device and use controls on the unit to adjust desired volume.
How do I reset my jam speaker?
Press and hold both the Power Button and Bluetooth Button on the bottom of the speaker for 5 seconds. The speaker will announce “Restoring to factory settings” and will flash a white light on the back. Wait around 1 minute for the factory reset to complete. The speaker will announce when the reset has finished.
How do I connect jam wireless?
Enable Bluetooth® on your device. From the Bluetooth® menu, select “JAM Live Loud.” When the device and JAM Live Loud are connected, you will hear a tone and the LED’s will slow flash blue. This means pairing is complete.
How do you know when Jam Wireless Speaker is charged?
A: Yes, the speaker has a battery level indicator. An LED light flashes red when battery is low, and solid green when battery is fully charged.
How do you pair a jam 2 speaker?
It worked for me:
- Turn on speaker.
- Press reset button.
- Turn on again.
- Press simultaneously the “PLAY” and the “+” buttons, until the blue light blinks faster (2-3 timer per second).
- At this moment, the speaker should show up on your tablet/phone pairing list.
- Pair the speaker. And you’re set to go!”
Why is my jam speaker not turning on?
If the device will not turn on, try to charge it at least for 3 to 4 hours using a USB to Micro USB plug to your laptop or PC. Remember Battery will last up to 4 hours when connected wireless and up to 12 hours when connected through Aux-in audio jack. If charging does not work, you may need to replace your battery.
Why does only one Bluetooth earbud connect?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
