What type of drain is best for shower?
What type of drain is best for shower?
The best type of drain for this situation is often called a “compression,” or “friction,” drain, such as this Oatey 2-Inch PVC No-Calk Shower Drain (available at SupplyHouse), which features a rubber gasket inside the drain body. Remove the gasket before the shower base is set.
How do I choose a shower floor drain?
Homeowners typically choose a style that matches the finish of other bathroom fixtures. If your taps are chrome, then choose a drain grate to match. A tile-able grate lets you top the drain with the same tile you used for the shower. The water drains around the edges and you get a seamless look for the shower floor.
What kind of shower drains are there?
The Two Main Types of Shower Drains
- Point Drains.
- Linear Drains.
- Three-Piece Drain.
- One-Piece Drain.
- Multipiece Shower Drain.
Where should a shower drain be placed?
The shower drain has to be at the lowest point of the shower floor, and so the floor has to slope down toward the drain from all directions. If the drain is in the center of the floor, you’ll have a relatively level space around the drain to stand on.
What is a tile in shower drain?
Tiling around a shower drain often is one of the final phases of tile setting when remodeling a shower. The tile is installed after completion of the walls, curb and shower subfloor. One of the most important aspects to consider when installing tile around a shower drain is the size of the pieces.
Are linear shower drains better?
Linear drains are an enhanced drainage method and they offer a minimalist seamless look to any shower. This remarkable simple way of getting rid of excess water is becoming the fastest-growing segment of luxury plumbing.
What is under a shower drain?
A shower drain is made of several parts. Beneath the removable strainer cover in the shower floor, the drain leads to an under-floor trap that connects to a drain line and the waste/vent stack. The shower pan consists of a waterproof membrane that seals the shower floor.
How far should the shower drain be from the wall?
Rough-In Dimension Terminology
| Toilet | Shower/Tub | |
|---|---|---|
| Discharge/Drain Hole from Back Wall | 12 1/2″ | 14″ |
| Discharge/Drain Hole (Vertical) | 0″ | 0″ |
| Fixture (Side to Side Buffer) | 15″ to 18″ min | 18″ min |
| Fixture (Front Buffer) | 21″ min | 18″ min |
How much slope should a shower floor have?
Shower Floor Slope To efficiently drain, the recommended minimum slope for a shower floor is about 4 percent, or a 1/2 inch drop per every 12 inches from the shower walls to the drain. In traditional tile shower construction, this slope is established in the mortar pre-pan.
Where does a linear shower drain go?
As a general rule-of-thumb, linear drains are located at either the back or side wall of where the fixtures are installed, or along the threshold or entrance.
