How do I troubleshoot my EZ Go gas golf cart?

How do I troubleshoot my EZ Go gas golf cart?

Instructions

  1. Check the gas tank to make sure there is enough fuel for operation.
  2. Remove the oil dipstick and check that the oil level is at or just above the add or fill maker.
  3. Inspect the battery of the golf cart.
  4. Examine the wiring and switches.
  5. Remove the air filter from the engine to access the carburetor.

Why does my ezgo gas golf cart not move?

Ignition Switch May Be Malfunctioning If your EZGO cart won’t even start or if it starts but won’t move, there’s a chance that your ignition switch may be to blame. Now, turn your switch to “ON” and watch the meter. If you don’t get a reading on any meter, then you have an ignition switch problem.

What would make a gas golf cart not start?

First, try this: turn the key switch on, hit the accelerator, and check for a clicking noise. If you don’t hear clicking, it’s time to take a look at your cart’s batteries. Other battery issues, such as off-kilter wiring or corrosion and melted wires could be causing your ignition.

Where is the reset button on EZ Go golf cart?

Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.

Why won’t My EZ GO start?

Check Ignition Wire If it has, reseat the wire into the solenoid. If the wire appears corroded, wear your work gloves and wipe down the wire and attempt restarting the golf cart. If the cart will not start, then you will need to replace the ignition wire.

What would cause a golf cart not to move?

Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.

How do you test a ezgo solenoid?

This can Also be tested by putting a test lead on each small terminal and pressing the gas pedal. The meter should read 36 V when the gas is pressed. If this voltage does exist when the gas pedal is pressed then the solenoid should click and engage.

Where are the fuses located on a ezgo golf cart?

For example, the 2005 EZGO electric cart put the fuse box below the driver’s seat. All you need to do is lift the seat and open the box to get easier access to these fuses on your cart.

How do you test a ezgo TXT solenoid?

How do you change oil on EZ GO golf cart?

How To Change Oil In E-Z-GO Golf Carts Run the engine until it is warm. Park the E-Z-GO golf cart on a level surface. Turn off the golf cart and remove the key. Remove the oil cap located on top of the engine. Clean the cap if it is dirty. Undo the three bolts that hold the oil filter in place and remove the oil filter.

How much do EZ-GO golf carts cost?

Considering their reputation in the industry, one can think that its products may be too expensive, but how much does an Ez Go cost these days? The Ez Go golf cart price may range from $5,000 to $12,200, depending on the cart’s model, features, and size.

How many batteries does an EZ GO golf cart take?

An electric golf cart will have either 4, 6 or 8 golf cart batteries and will have either a 36 volt or 48 volt electrical drive system.

Are all EZ GO golf cart keys the same?

Each manufacturer has a standard key for their golf cars. The keys have changed from time to time, but generally are the same for most cars. One EZGO key will usually fit all EZGO products. However, there are exceptions.

author

Back to Top