What is Hydro barrier used for?

What is Hydro barrier used for?

HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

Can you paint over Hydro barrier?

Yes you can, but if the hydroban is applied roughly the paint will show it.

Is Hydro ban water based?

HYDRO BAN® SLURRY is a cement based, one component, polymer fortified material that mixes with water and easily applies with brush, roller or trowel.

What is Hydroban made of?

HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

How long does Hydro Ban take to dry?

Let topcoat dry to the touch, approximately 1–2 hours at 70°F (21°C) and 50% RH. When last coat has dried to the touch, inspect final surface for pinholes, voids, thin spots or other defects. HYDRO BAN will dry to an olive green color when it’s dry to touch.

Can you paint over RedGard waterproofing?

You can paint over RedGard, but it will void the warranty that comes with the RedGard product. The warranty is in place to show that the manufacturer is confident that this product is going to remain waterproof for the duration of its time on your wall or floor.

Is laticrete waterproof?

LATICRETE® tile waterproofing membrane products provide protection for floors and walls for applications ranging from occasionally wet, to continuous water submersion as in showers or pools. Our shower waterproofing membrane has been industry tested to withstand the test of time.

Is LATICRETE waterproof?

What color is LATICRETE Hydro Ban?

HYDRO BAN will change from a sage green color to an olive green color when dry. The second liquid coat can then be applied and must also dry to the touch. A LATICRETE latex-fortified thin-set (e.g. 257 Titanium, 254 Platinum, etc…)

What is the difference between Hydro ban and Laticrete?

Laticrete Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. Laticrete 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations.

What is hydro ban waterproofing membrane?

Laticrete Hydro Ban Waterproofing Membrane is an innovative liquid waterproofing membrane that literally goes on as easy as paint.

What are the benefits of hydro ban?

When applied, it is a light sage green color and, when fully cured, it changes to a darker olive green hue. Some advantages of Hydro Ban include: Additional Hydro Ban products available from Laticrete include Hydro Ban Quick Cure, Hydro Ban Cementitious Waterproofing, and Hydro Ban Sheet Membrane. Find out if Wedi or Kerdi is the better membrane.

How do you use hydroban cementitious waterproofing?

HYDRO BAN® Cementitious Waterproofing is a one component, polymer fortified, cement based waterproofing material that mixes with water. Apply a liberal coat (20 mil [0.5mm]) of HYDRO BAN Cementitious Waterproofing Membrane with brush or roller over substrate including pre-treated area.