Why does my Kyocera printer keep jamming?
Why does my Kyocera printer keep jamming?
If persistent jamming is the problem, the first test would be to remove all of the paper in the printer and replace it with paper from a new ream, or of a different manufacturer. Check the label on the new package of paper to verify the paper meets Kyocera’s specifications. Short grain paper will cause frequent jams.
How do I clean the Kyocera printer drum?
Remove the clip and spring that holds the drum and developer/toner unit together. Remove the drum shaft and drum – pop the shaft on the left hand side of the drum unit towards you and side it out. Remove the drum cleaning blade. Replace the drum cleaning blade with a new one and re-assemble in the reverse order.
What to do if printer says paper jam but there is no paper in it?
Locate the output tray.
- Gently pull the jammed paper out, if any, of the output tray to remove it.
- Now, try to print. Your device will work smoothly.
Why does my printer keep getting paper jams?
This is one of the most common causes of paper jams. Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn’t appropriate for your particular printer can all result in a jammed printer.
Which of these are commonly causes of printer jams?
So here are the most common causes:
- Paper inserted incorrectly. This tends to be the number one cause, and there’s a lot that can go wrong while you’re loading the paper in the input tray.
- Damaged rollers. Rollers pull in sheets from the input tray.
- Low quality paper.
- Low quality cartridges.
How do you clean a Kyocera cartridge?
How to Clean a Kyocera Printer
- Open the cover.
- Remove the drum if applicable.
- Kyocera printers have a green cleaning knob.
- Brush any debris from the paper tray and feed that is easily visible.
- Close the printer and make sure the display reads that it is ready to print.
How do you change the paper tray on a Kyocera?
- To configure Paper Tray Settings, Select User tools/ Counter.
- Select Tray Paper Settings.
- There are three screens, which allow you to configure your paper tray setting depending on your needs.
- Select Tray 1 and then Select OK.
- Select Tray Paper Size: Tray 1.
How do you put paper in a Kyocera MP tray?
Load Paper in the Multi-purpose Tray (MP Tray)
- Open the upper cover (1) and MP tray (2) using the finger holds on each side.
- Using both hands, pull up the paper tray until it locks into place.
- Lift up the paper support.
- Gently press and slide the MP tray paper guides to match the width of the paper you are using.
What to do if your Kyocera printer is jamming?
If persistent jamming is the problem, the first test would be to remove all of the paper in the printer and replace it with paper from a new ream, or of a different manufacturer. Check the label on the new package of paper to verify the paper meets Kyocera’s specifications. Grain structure is very important.
How can I tell if the paper is Kyocera approved?
Check the label on the new package of paper to verify the paper meets Kyocera’s specifications. Grain structure is very important. Short grain paper will cause frequent jams.
What is the weight of Kyocera’s paper?
Although this is never the answer anyone wants to hear, it is the most overlooked component and the simplest to remedy. First, Kyocera’s paper specification is: Item/ Specification: Weight/16 to 24 lbs/ream (60 to 90 g/m2) Thickness/3.4 to 4.3 mils (0.086 to 0.110 mm)…
What is the most overlooked component of the Kyocera system?
Although this is never the answer anyone wants to hear, it is the most overlooked component and the simplest to remedy. First, Kyocera’s paper specification is: Item/ Specification: Weight/16 to 24 lbs/ream (60 to 90 g/m2) Thickness/3.4 to 4.3 mils (0.086 to 0.110 mm)
