How do you port forward if you have 2 routers?
How do you port forward if you have 2 routers?
On the second router, you must do port forwarding. The ports you open are the same as the ones you opened on the first router. However, instead of the recorder’s IP address, you use the first router’s IP address for port forwarding on the second router.
How do I allow ports on my router?
Head over to your router’s settings. Enter your credentials (device username and password). Look around for the Port Forwarding tab. On the Port Forwarding tab, enter your device’s name and open your preferred port—for example, type 8080 to open port 8080.
Do I need to port forward on both router and modem?
You only need to port forward on the router. Beware, it’s quite common for dsl ISPs to provide an all-in-one device, a combination dsl modem+router. If you then place your own router behind such a combo device, you’re double NAT’d, which means you will have two firewalls to manage.
How do I setup my 2Wire router?
Setting up in-home Wi-Fi on your 2Wire or Pace gateway
- Make sure your 2Wire or Pace gateway and computer are connected by an Ethernet cable, and the connection is secure on both ends.
- Click Wireless.
- Choose or enter the following settings: Item/field. Setting. Enable Wireless Interface. Default: Enabled.
- Click Save.
How do I setup a DMZ with two routers?
Plug the WAN port of a second wireless router into one of the Ethernet ports on the DMZ router, then connect all of your computers and other Ethernet- and wireless-capable devices to the second router.
Can I port forward in bridge mode?
Bridge Mode: You cannot configure Port Forwarding on AmpliFi if your router is set to Bridge Mode, since it is effectively not acting as a router. The router you select to be on Bridge Mode will not be able to perform port forwarding duties; that will have to be configured on the other router.
How do I use a 2Wire router as an access point?
Get into the 2wire modem config and look around to disable the DHCP server. Afterwards, hit save settings, now you have a nice ACCESS POINT. Connect your PC and cable modem to the 2wire modem(now access point) and you will be able to have cable modem internet through your wifi modem. It works for me.
Can I DMZ a second router?
