Does Behr Deckover come in different colors?
Does Behr Deckover come in different colors?
It’s available in 54 solid custom colors, and is great for decks, patios, composite decks, pool decks and walkways. DO NOT USE ON DRIVABLE SURFACE SUCH AS GARAGE FLOORS AND DRIVEWAYS.
How long should Behr Deckover last?
If the DECKOVER coating is applied according to label directions to a properly prepared, sound wood or concrete substrate, the film can be expected to last as long as a high quality Solid Color Wood Stain. BEHR Solid Color Wood Stains last 5 to 10 years on horizontal surfaces and 15 to 25 years on vertical surfaces.
Can you paint over Deckover?
Giving you expert advice, painting a deck over old paint, without having to strip it first. Hoping to give you good news you’re looking for, not having to strip old paint. But any old paint currently lifting up, peeling, must be removed. If your existing deck paint is laying down properly, no stripping is required.
How long before you can walk on Behr Deckover?
Wait 24-48 hours before light foot traffic. 72 hours to full cure. Additional dry time may be needed in cooler temperatures and higher humidity.
How long does Deckover need to dry before rain?
If the coating was applied and was exposed to rain 24 hours after application or later, it should be ok. However, for best results, it would be ideal to allow the coating to fully cure for 72 hours (at least) before allowing moisture to come in contact with the finish.
How do I get rid of Behr DeckOver?
The only good part about the peeling DeckOver was, it ended up being relatively easy to remove. Much of it came up just with our fingers- we could literally just pick it up and peel it off. What we couldn’t peel off with our hands, we used a scraping tool and would pry an edge off, then peel it off.
Is DeckOver a good product?
Deckover definitely is the best outdoor paint I have ever used. I used it on my deck, my sidewalk, the side of a shed, and anywhere that there might be cracks on a surface that would let water penetrate.
Why is my deck over peeling?
Because wood absorbs moisture from rain and snow, and when the sun comes out and dries the wood out, the moisture vapor from the wood needs to be able to pass through the stain and escape. If there is too much stain, it restricts the moisture from evaporating away, so peeling can occur.
Why is my deck paint peeling?
Long exposure to sunlight and moisture will cause the paint to blister and peel. If the wood was damp or not clean, the paint would not make a strong bond with the surface of your deck. The best way to deal with a peeling painted surface would be to completely remove the paint and stain the deck.
How many coats should Behr deck over?
2 Coats
Detailed Application Tips. One 3.78 L of ADVANCED DECKOVER Coating can cover up to 7 m2 with 2 Coats. It is strongly recommended to fill cracks, nail holes and accessible board ends prior to applying the first coat.
