What fluid does a NV5600 take?
What fluid does a NV5600 take?
The NV5600 takes a special lubricant, not gear oil. The Mopar part number is 4874464. Transmissions specific 5W30. 5W30 motor oil is not recommended.
How much transmission fluid does a NV5600 hold?
The NV5600 has a 4.75 quart fluid capacity, but we recommend adding an additional quart when filling for better lubrication to 6th gear, so we’d recommend you purchase 6 quarts total.
What fluid does a Dodge NV4500 take?
NV4500 Transmission Fluid Spec The NV4500 manual transmission is highly sensitive to its fluid type as it uses special carbon fiber synchronizers. The original fluid spec is Castrol Syntorq synthetic 75W-90 GL-4 manual transmission fluid.
How much does a NV 5600 transmission weigh?
The NV5600 weighs 360 lbs. and is provided in both 2WD and 4WD. The transmission can handle Dodge diesel pickups with a gross combined hauling weight of 26,000 pounds.
Will a NV5600 bolt up to a 12 valve?
Yes it will. You need the engine adapter/ flywheel and clutch for the NV5600 unless it is a small shaft 5600. If its a small shaft you can use the getrag clutch.
How do you check the transmission fluid on a 12 volt Cummins?
How to Check Transmission Fluid
- Make sure your car is in park before getting out and opening the hood.
- Find the transmission fluid dipstick.
- Remove the dipstick and touch the fluid, moving it around between your thumb and forefinger.
- Wipe off the dipstick, then insert it back into the vehicle.
How much does a Dodge 6 speed transmission weigh?
G56 Transmission Specs
| Transmission: | Mercedes-Benz G56 |
|---|---|
| Weight: | ~ 200 to 225 lbs |
| Fluid Capacity: | ~ 4.95 quarts (9.9 pints) |
| Fluid Type/Spec: | MOPAR ATF+4 automatic transmission fluid (recommended by Ram Trucks) SAE 75W/90W gear oil (recommended by Mercedes-Benz) |
| Service Intervals: | Replace transmission fluid every 60,000 miles |
Is the NV5600 a good transmission?
As the NV5600 manual transmission has good reliability and is long lasting, is suitable for towing with high horsepower. Common problems generally result from significant usage and defective 6th gear. Losing fluid causes problems for 1st gear and the output bearing.
