Which of the following should be worn when operating a metal cutting bandsaw?
Which of the following should be worn when operating a metal cutting bandsaw?
Wear safety glasses when operating the metal cutting bandsaw. 2. Never wear loose clothing, or jewelry when operating the metal cutting bandsaw.
What are the safety rules for a band saw?
What safety procedures should you follow when using a band saw?
- Wear safety glasses or goggles, or a face shield (with safety glasses or goggles).
- Wear hearing protection that is suitable for the level and frequency of the noise you are exposed to in the woodworking area.
- Wear protective footwear when required.
What are the risks of using a band saw?
The risks. Employees’ hands and fingers can come into contact with the blade of unguarded bandsaws. Lack of guarding also allows clothing to become entangled in the exposed bandsaw wheels. If a blade is dull or has teeth missing, the material being cut can judder or kick back.
What should you never cut on a bandsaw?
Always adjust the speed of the band saw while the machine is running. Never adjust the speed with the machine turned off. Never cut materials that might be hardened, such as tool steel, files, hardened guideways, stainless steel etc.
What are the two safety checks you need to perform before turning on a bandsaw?
Which kind of protection should an operator always wear when using a band saw?
Operating Precautions Always wear proper personal protection equipment when using a band saw, including the use of safety glasses or goggles, hearing protection, and a dust mask. Never wear gloves, a tie, loose clothing, a watch, rings, or jewelry when using a band saw. Tie long hair back or secure under a cap.
What is a metal band saw?
A bandsaw is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
Which side of the line should you always make cuts on?
waste-side
Make all cuts on the waste-side of the line. 9. Always keep your hands on the sides of the blade while operating…. never in front of blade!
