Common questions

How do you reset the toner on a Brother HL-5450DN?

author 0

How do you reset the toner on a Brother HL-5450DN?

Brother HL-5450DN – Reset Toner Cartridge

  1. Ensure the printer is turned off.
  2. Open the printer front cover.
  3. Hold the Go button while turning the printer on.
  4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off,
  5. Press the Go button two (2) times.
  6. Depending on your cartridge:

How do I reset my brother HL-5450DN drum?

Reset the drum counter for Brother HL-5450/5470/6180 series…

  1. For the models with LCD: Hold down Go until the Drum Clear message is displayed on LCD, then release Go.
  2. For the models without LCD: Press and hold down Go for about 4 seconds until all the LEDs light up. Once all six LEDs are lit, release Go.

How do I fix the quality of my brother toner cartridge?

Starts here3:30How to fix a Brother toner cartridge with quality problems – YouTubeYouTubeStart of suggested clipEnd of suggested clip61 second suggested clipPress on the lever and remove the toner cartridge. Look at the developer roller. Check if there areMorePress on the lever and remove the toner cartridge. Look at the developer roller. Check if there are spots dirty or other defects on the roller. Rotate the roller.

How can I bypass my brother toner cartridge not detected?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

How do I reset my brother hl 2250dn printer?

Brother HL-2250 – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.

How do I print a test page on a Brother HL 5450dn?

NOTE: The screens may differ depending on operating system being used and your Brother machine.

  1. Open Printer Properties. (Click here to see how to open Printer Properties.)
  2. Open the General tab and click the Print Test Page. The test page will be printed.

Why does my Brother laser printer print blurry?

Ghost printing is characterized by repeating light mirror image of the original image or text on the page. This problem may also be described as fuzzy, blurry, or doubled print. (underlined in red). This may be caused by something like oil that may be adhered on the surface of the Encoder strip, inside the machine.

author

Back to Top