What does the reed switch do on a golf cart?
What does the reed switch do on a golf cart?
Reed Switches are used to prevent cart operation with the charger plugged in. They have become increasingly expensive and they are very fragile. this component is used to eliminate the reed switch from the electrical system.
Why does my electric golf cart not move?
When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
Where is the reset button on a golf cart?
It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again.
How do you test a golf cart switch?
Testing a Club Car Ignition Switch
- Find the back and red wires on the back of your battery pack.
- Connect the black wire to the negative terminal and the red to the positive.
- Keep the cart turned off while you work on it.
- Check the wires with a probe meter while the cart is off – only one wire should have a charge.
What is a reed switch and how does it work?
A reed switch is an electromagnetic switch used to control the flow of electricity in a circuit. They are made from two or more ferrous reeds encased within a small glass tube-like envelope, which become magnetised and move together or separate when a magnetic field is moved towards the switch.
How long do reed switches last?
The “heart” of all GEMS level and flow switches is a hermetically sealed, magnetic reed switch within the unit stem. If used within its current carrying capacity, the reed switch will last many years – 2 million cycles under ideal conditions.
How do you test a golf cart Micro Switch?
You may want to tape it to the side of your cart or a grounded part to avoid power flow. Now, remove the negative wire and tape it down in a similar way. Put the voltmeter probes on the proper terminals. Test With the Voltmeter – At this point, you should be getting a reading from your micro switch.
How do I reset my Yamaha Golf Cart?
Identify your main battery supply (usually the largest battery) on your motor. Check around this supply for a small red button that may or may not be labeled “Reset”. Press and hold this button for a few moments and then release it to reset the motor.
Where are fuses in Yamaha golf cart?
Fuse Box Location on Yamaha Carts For example, the 2014 Yamaha golf cart has a fuse box on the left side of the controller – which requires you to open up the engine of the cart to look for it. This location is common between gas and electric Yamaha carts, so be prepared for that when you try to seek it out.
Do golf carts have fuses?
Golf carts serve a greater need than just driving on the golf course. Many hardware stores carry fuses that are compatible with those in a golf cart. A blown fuse can also mean there is an electrical problem. A blown fuse requires a thorough examination of the circuit system to locate the problem.
How do I bypass the reed switch in an EZGO golf cart?
You can bypass the reed switch in an EZGO golf cart by connecting the red wire of the reed switch to the white wire from the charger receptacles and to the red wire from the FRN micro switch. Ensure that the main power supply is disconnected before accessing the reed switch and charger receptacles.
Why is my Yamaha golf cart intermittent failure?
The starter brushes can cause the problem of intermittent failure of the cart. Simply replace them and your problem will disappear. In the G29 Yamaha golf cart, the pedal switch could be the issue. You should check it thoroughly.
How to fix G29 Yamaha golf cart pedal switch problems?
In the G29 Yamaha golf cart, the pedal switch could be the issue. You should check it thoroughly. One quick way to do this is to press the pedal right up to the floor and remove your foot in a quick motion allowing the pedal to spring back to its original position in one stroke. Sometimes, this action can sort out the issue.
What happens when a micro switch goes bad in a golf cart?
A faulty micro switch can make the wiring around it go out of place. A defective micro switch disturbs the overall power flow in the golf cart. A faulty micro switch leaves the nearby components damaged due to a low or unrated power supply. A dislocated micro switch can disturb the normal operation of other components.
