What size head is a M10 bolt?
What size head is a M10 bolt?
SOCKET HEAD CAP SCREW – METRIC
| Size | Diameter | Head Height |
|---|---|---|
| M10-1.50 | 10.00 | 10.00 |
| M12-1.75 | 12.00 | 12.00 |
| M14-2.0 | 14.00 | 14.00 |
| M16-2.0 | 16 | 16.00 |
How are metric bolt heads measured?
Fastener length is measured from where the material surface is assumed to be, to the end of the fastener. For fasteners where the head usually sits above the surface, the measurement is from directly under the head to the end of the fastener.
What are the metric sizes of bolts?
Metric clearance and tapping drill hole sizes.
| Size | Clearance Hole mm | Tapping Drill (std Pitch) |
|---|---|---|
| M5 | 5.5 | 4.2 mm |
| M6 | 6.5 | 5.0 mm |
| M8 | 9 | 6.75 mm |
| M10 | 11 | 8.5 mm |
What size bolt has a 36mm head?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| 35mm | 35.58 | |
| 13/16″BSW | 35.89 | |
| M24 | 36mm | 36.70 |
| 7/8″UNC | 1-7/16″ | 37.22 |
What size metric bolt has a 14mm head?
Metric Bolt Head/Wrench Size
| Bolt Diameter (mm) | Head/Wrench Size (mm) | |
|---|---|---|
| ANSI/ISO | JIS | |
| 10 | 16 | 14 |
| 12 | 18 | 17 |
| 14 | 21 | 19 |
How do I know if my bolts are standard or metric?
How long is that bolt? Most bolts come in pretty uniform lengths; and this is a good way to determine if the bolt is metric or standard. Measure the bolt length (not including the cap), and see if it’s closer to a fraction of an inch, or a nice and round millimeter length that ends in 5 or 0.
