What kind of transmission fluid does a 1997 Subaru Outback take?

What kind of transmission fluid does a 1997 Subaru Outback take?

Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.

What type of oil does a 1997 Subaru Legacy take?

SAE 5W-30
Engine Oil SAE 5W-30 is preferred. Capacity: 4.8 quarts. . . . (with filter)After refill check oil level.

How much transmission fluid does a Subaru Legacy hold?

The 2011 subaru legacy 2.5 I transmission fluid capacity is 4.2 Quarts.

Can you put ATF in a manual?

Yes – provided the original equipment manufacturer recommends it. It’s important to check your owner’s manual to make sure before dumping ATF in your manual transmission. In fact, some manuals may call for a gear lube or even a motor oil in older units.

What kind of ATF does Subaru use?

For automatic transmissions, Subaru recommends using Subaru ATF Idemitsu ATF hp “Dexron iii” type automatic transmission fluid. It is recommended to change Your transmission fluid every 80,000 miles.

What kind of oil does a 1998 Subaru Legacy Outback use?

Engine Oil SAE 5W-30 is preferred. Capacity: 4.8 quarts. . . .

How much oil does a 2004 Legacy take?

SAE 5W-30 is preferred. Capacity: 4.2 quarts (with filter)After refill check oil level.

How much oil does a Subaru Legacy take?

Subaru Oil Guide:

Model Subaru Oil Required Capacity
Subaru Legacy & Outback 2013 – 2021 0W-20 Synthetic Oil 4.4 – 5.1 Quarts
Subaru Legacy Turbo 2005 – 2010 5W-30 Conventional Oil 4.5 Quarts
Subaru Legacy Turbo 2011 – 2012 5W-30 Synthetic Oil 4.5 Quarts
Subaru Legacy & Outback 6 Cyl. 2002 – 2019 5W-30 Conventional Oil 6 – 6.9 Quarts

How many quarts of transmission fluid does a Subaru Outback take?

A 2016 Subaru Outback transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.

What type of transmission fluid is used in a Subaru?

The type of transmission fluid found in most Subaru vehicles is Dexron III and Dexron IV. However, some models have also used Subaru-rated transmission fluid. Dexron automatic transmission fluid is available in four common weights, Dexron, Dexron II, Dexron III and Dexron VI.

What transmission is in a Subaru?

Subaru motor vehicles have used manual, conventional automatic, and continuously variable ( CVT ) transmissions. Subaru manufactures its own manual and CVT transmissions (for non-Kei cars). Since the 1970s, all Subaru conventional automatic transmissions have been Jatco designs adapted to Subaru specifications.

Do I need to change the CVT transmission fluid?

CVT fluid certainly wears out over time. It should be changed much sooner than automatic or manual transmission oil. CVT fluid has to be in acceptable condition to protect against metal-to-metal contact. It also has to provide the correct frictional properties. Once the CVT fluid has broken down, poor performance and accelerated wear can start.

author

Back to Top