How do you reset a fuser kit?

How do you reset a fuser kit?

Press the Home screen, scroll to and touch the ADMINISTRATION button.

1. Select the MANAGE SUPPLIES menu.
2. Select the RESET SUPPLIES submenu.
3. Select the option for NEW FUSER KIT.
4. When it says NEW FUSER KIT = NO / YES, select YES.
5. Press OK to save that selection.

How do you reset the fuser counter on a HP cp5225?

Follow these steps to reset the Fuser Kit counter:

1. Press the Home button on the control panel.
2. Open the Administration menu.
3. Choose the Manage Supplies option.
4. Choose the Reset Supplies option.
5. Choose the New Fuser Kit option.
6. Use the Down arrow button to highlight the word “Yes” and then press OK.

How do I clear the message fuser error or self diagnostic machine will restart in 15 minutes error?

How do I clear the message ‘Fuser Error’ or ‘Self-Diagnostic.. machine will restart in 15 minutes Error?

1. Press and hold down the Power key to turn the machine off.
2. Unplug the power cord from the back of the machine.
3. Wait approximately 30 seconds.
4. Press and hold down the Power key to turn the machine on.

How do I reset my HP 4700 fuser?

Basically all you must do is install a replacement fuser from us, then turn on your printer, and the power-on process will automatically reset the page count for you. To ensure this process works correctly, double-check that your printer’s power is off before you install the new fuser.

What is HP ITB?

HP Color LaserJet CP5225 and CP5525 Printer Series – Preparing Intermediate Transfer Belt (ITB) for Shipping. At times, it is necessary to ship an Intermediate Transfer Belt (ITB) that has been used in a printer for a period of time. Most often, this is because HP has requested the part be returned for evaluation.

What is ITB in printer?

What is a transfer unit in a printer?

The transfer unit is the part of the laser printing process that is responsible for transferring the image on the page before it goes through the fusing unit. Transfer units do eventually wear out and need to be replaced after an extended period of use.

How do I clear the message self diagnostic?

The error message SELF-DIAGNOSTIC – Will Automatically Restart within 15 minutes appears when the machine is not detecting the proper temperature in the fuser unit. This message may clear after turning the machine off using the power button on the control panel and unplugging the power cord.