How do you change a PICC line dressing with Statlock?
How do you change a PICC line dressing with Statlock?
Gently stroke the underside of the pad with the alcohol to dissolve the adhesive as the pad lifts away form the skin. Once loose, take hold of the stat lock (being careful not to pull on the PICC line) and lift the plastic doors one side at time to release the PICC. Carefully remove the PICC from the lock.
What are the steps to changing a PICC line dressing?
To place a new dressing:
- Place the new Biopatch over the area where the catheter enters the skin.
- If you have been told to do so, apply a skin prep where the edges of the dressing will be.
- Coil the catheter.
- Peel the backing from the clear plastic bandage (Tegaderm or Covaderm) and place the bandage over the catheter.
How often do you change Stat locks?
STATLOCK® devices should be monitored daily and replaced when clinically indicated, at least every 7 days. Catheter insertion site should be treated per established hospital policy and procedure. STATLOCK® devices are contraindicated on patients with known tape or adhesive allergies.
What is a PEC line?
Overview. A peripherally inserted central catheter (PICC), also called a PICC line, is a long, thin tube that’s inserted through a vein in your arm and passed through to the larger veins near your heart. Very rarely, the PICC line may be placed in your leg.
How do you change a dressing on a central line?
Follow these steps:
- Wash your hands for 30 seconds with soap and water.
- Dry with a clean paper towel.
- Set up your supplies on a clean surface on a new paper towel.
- Put on a pair of clean gloves.
- Gently peel off the old dressing and Biopatch.
- Put on a new pair of sterile gloves.
How do you change a central line dressing?
How long can a Statlock stay on?
The STATLOCK® Foley Stabilisation Device is designed to be worn for up to seven days after which it should be replaced with a new STATLOCK® Foley Stabilisation Device.
How often should a Foley Statlock be changed?
StatLock® devices should be monitored daily and replaced when clinically indicated, at least every 7 days. Catheter insertion site should be treated per established hospital policy and procedure. StatLock® devices are contraindicated on patients with known tape or adhesive allergies.
What is the sterile dressing change procedure for PICC line?
PICC Line Sterile Dressing Change Procedure: 1. Place arm on drape provided in dressing change kit. 2. Open StatLock and Biopatch packages into the dressing change kit box. 3. With gloves on, remove the occlusive dressing by pulling up the edges and then pulling the dressing toward the midline.
What is the statlock® PICC/CVC stabilization device?
The StatLock ® PICC/CVC Stabilization Device in a dressing change kit offers the StatLock ® PICC/CVC Stabilization Device with additional components including a mask, gloves, measuring tape, transparent dressing, gauze, alcohol pads, drape, label, and adhesive strips.
How do you change a PICC line after a blood draw?
PICC Lines: Dressing change and blood draw. With gloves on, remove the occlusive dressing by pulling up the edges and then pulling the dressing toward the midline. With gloves on, pull up edges of StatLock. Unclip the locks on the StatLock. With one hand, lift the PICC line up, while pulling the StatLock off the skin with the other hand.
How do you remove statlock PICC plus?
Removal Technique The StatLock® PICC Plus stabilization device should be monitored daily and changed if the pad is lifting, at least every 7 days. Disengage Fold adhesive anchor pad underneath on both sides so it sticks to itself. 4. Stabilize catheter with gloved finger while holding the StatLock® device. Next, use thumb of opposite hand to
https://www.youtube.com/watch?v=jpUe6pEi5Zg
