How do you adjust the draw weight on a Browning compound bow?
How do you adjust the draw weight on a Browning compound bow?
label on the lower limb of the bow. Slight changes in draw weight can be obtained by turning the limb bolt in or out. Before making any changes in weight, turn the limb bolt clockwise until it no longer moves. This adjusts the limb to its maximum weight setting.
How do you adjust the draw length on a Browning compound bow?
Use an Allen wrench to unscrew the draw length adjustment screw. Tighten the screw in the appropriate corresponding letter. For example, if the “A” setting is a 30-inch draw and you want the bow set to a 28-inch draw, move the draw length adjustment to the “C” position. The “D” position would indicate a 27-inch draw.
Does Browning make good bows?
In 2001, for assorted business and competitive reasons, Browning entered into an agreement with PSE in Arizona to have them take over the license for Browning Archery products. At that point production ceased in Utah and was moved to PSE facilities.
How do I know the draw weight of my compound bow?
To measure a bow’s draw weight, you’ll need a weight scale. You take the measurement by attaching the scale to the bowstring near the nock, pulling the string to full draw, and reading the scale. To eliminate human error, take the measurement multiple times.
What draw weight should I get for a compound bow?
A Beginners Guide to Buying the Right Bow in 3 Simple Steps
| Archer Weight | Approx. Draw Weight (Compound Bow) |
|---|---|
| Small-Frame Women (100-130 lbs.) | 25-35 lbs. |
| Medium-Frame Women (130-160 lbs.) | 30-40 lbs. |
| Larger-Frame Women (160+ lbs.) | 45-55 lbs. |
| Small-Frame Men (120-150 lbs.) | 45-55 lbs. |
How do you determine your draw length?
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.
Can you adjust the draw length on a compound bow?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
Where is the serial number on a Bear compound bow?
Serial Number * Serial number located on lower limb of bow.
Who made Browning bows?
In 1962 Browning purchased the bow making operation of Gordon Composites in San Diego. Browning bows were built from 1962 through 1975, initially in a facility in San Diego from the Gordon (plastics) brothers. Browning later moved production to the Browning’s Utah headquarters.
What happens if you over stress a Browning bow?
Over stressing Browning Archery compound bows by using arrows lighter than the five grain minimum will void the warranty and may cause damage to the bow and possible injury to the shooter. Browning Archery makes no other claims of warranty either expressed or implied.
How often should I change the string on my Browning bow?
Browning Archery recommends that all bows undergo string and cable changes every 5,000 shots or every twelve months (whichever comes first) to maintain Browning Archery warranty coverage. Total arrow weight must be a minimum of five grains per pound of bow peak draw weight.
What is the warranty on a Browning Archery sight?
Browning Archery sights (excluding sight pins), bow quivers (excluding hood liner), and arrowrests carry a 100%warranty for five years to the original owner. Warranty work must be performed by Browning Archery or an authorized Browning Archery dealer.
