How much oil does a Ford 9 inch rear end hold?

How much oil does a Ford 9 inch rear end hold?

9 inch Ford rear-ends hold 2 1/2 quarts. That’s the English measurement. 9 pints is what you can drink while waiting for the 2 1/2 quarts of gear oil to go into the housing.

How many quarts of gear oil does a Ford 9 inch take?

One entire bottle (3.8 fl. oz.) is required in addition to the 2.5 quarts of gear oil. Ford Racing brand additive part # CM-19546-A1 is recommended.

What is gl6 gear oil?

The designation API GL-6 denotes lubricants intended for gears designed with a very high pinion offset. Such designs typically require protection from gear scoring in excess of that provided by API GL-5 gear oils.

What fluid does a Ford 9 take?

Because many of today’s commercially available synthetics are not engineered with the 9-inch’s requirements in mind, Currie advises using only conventional 85W-140 non-synthetic GL-6 rated gear oil in all front and rearend applications.

How much oil does a Dana 44 take?

Front Dana 44 differential needs 2.7 pints (1.35 quarts) and the rear needs 4.75 pints (2.375 quarts). If you have factory covers, all you need to do is fill up your differentials until gear oil oozes out of the fill hole.

What does GL stand for in gear oil?

GEAR LUBRICANT
GL is short for ” GEAR LUBRICANT” API has the following GL classifications: for Gear Oils – GL-1: Oil without EP additive.

What does mt1 mean on gear oil?

Such designs typically require (gear) score protection in excess of that provided by API GL-5 gear oils. The original API GL-6 test equipment is obsolete. API Category MT-1 designates lubricants intended for non-synchronized manual transmissions used in buses and heavy-duty trucks.

What kind of gear oil does Currie use?

Currie 85W-140, GL-6 Racing Gear Oil High-performance non-synthetic racing gear oil meets the API GL-6 specification and is designed specifically for the requirements of 9-inch gear assemblies. It provides maximum shear stability and extreme pressure protection required to extend the life of your Currie rearend. SKU: CE-9013

What kind of oil goes in a limited slip differential?

If you have a clutch-type limited-slip differential, a friction modifier additive must be used in addition to this oil. 1 liter (1.06 quart) bottle of non-synthetic Currie 85w-140, API GL-6 Racing Gear Oil.

What are the parts of a Currie Ford 9 inch gearbox?

Every Currie Ford 9-inch third member includes: a new nodular iron or aluminum gear case, bearings, seals, solid pinion bearing spacer, pinion support, yoke, and choice of gear ratio, and limited-slip, locking differential or spool.

Why choose curcurrie complete Ford 9-inch third members?

Currie complete Ford 9-inch third members, make it easy to update your street rod, muscle car or race vehicle with a new gear ratio or carrier.