How do you determine the color of a resistor?
How do you determine the color of a resistor?
In six band resistor color code, the first three bands denote the resistance values, 1-multiplier band, 1-tolerance band & 1-temperature coefficient value. The formula for the three-band resistor color code is – 1st digit. 2nd digit. third digit x Multiplier = 1.0.
What color is a 10 ohm resistor?
Brown, Black, Black, Gold
| Band | Value |
|---|---|
| 2nd Black | 0 |
| 3rd Black | 1 |
| 4th gold | +-5% |
| 10 Ohm tolerance: +-5% |
How do I identify a 6 color band resistor?
Example: If the colors on a 6 band resistor is in this order: green, brown, violet, black, gold and orange. The values of color bands will be like this: Green = 5, Brown = 1, Violet = 7, Black = 100, Gold = 5%, Orange = 15ppm.
Which colour represents 7 in resistor color code?
Violet
Resistor, capacitor and inductor
| Color | Significant figures | Tolerance |
|---|---|---|
| Yellow | 4 | – |
| Green | 5 | ±0.5% |
| Blue | 6 | ±0.25% |
| Violet | 7 | ±0.1% |
What are the colors of a resistor?
Resistor Color Code Chart and Resistance Calculator. Resistors have standard colors for identification of the resistance value. In order, the colors are: black, brown, red, orange, yellow, green, blue, violet, gray, and white. Reading resistors is a very simple procedure if you use the chart and formula below.
How do you identify a resistor?
The value of a resistor is usually given by a series of colored bands on its surface. In most cases, there are four bands of color. The first two bands represent the base-value of the resistance as a two-digit number, the third band gives a multiplier, and the fourth band indicates the tolerance.
What color is a 10K resistor?
10k resistor color code is as shown in the image it is brown/black/orange/gold, colour code of resistors does not depend on the power rating of resistor, the power rating of the resistor depends on its physical size and comes under standard wattage rating of 1/4 W,1/2W,1W,10W, etc.
What is the standard value of a resistor?
Standard Resistor Values. This page provides a quick reference for standard resistor values based on a specified tolerance. Standard Resistor Values : 0.1%, 0.25%, 0.5%. Standard Resistor Values : 1%. Standard Resistor Values : 5%. Standard Resistor Values : 10%.
