How high should Seymour Duncan pickups be?
How high should Seymour Duncan pickups be?
3/32 of an inch
A good starting point for the distance from the bridge pickup to the strings is 3/32 of an inch. The neck pickup can be set to provide a good output balance when compared to the bridge or to produce a particular tone when used together with the bridge.
Are Seymour Duncan Invaders passive?
The Seymour Duncan Invader has a well-earned reputation as the most aggressive passive pickup ever. It’s the weapon of choice for metal, punk and rock players who seek maximum power and sustain without switching over to a battery-powered active system.
How far should the pickups be from strings?
Start by setting all of your guitar pickups to 3/32” (0.093”, 2.38mm) on the bass side and 2/32” (1/16”, 0.0625”, 1.98mm) on the treble side. Remember, this is the space between the top of the pole piece and the bottom of the string, held down at the last fret.
Who uses a JB pickup?
The Alnico-5 based JB was created in the late 70’s when high-gain guitar first began finding it’s footing. It became the standard for huge bands such as Metallica, Aerosmith, and Megadeth which has helped earn it’s title as one of the most popular pickups of all time.
Are invader pickups active?
The Invader is available in 6, 7, and 8-String passive and active mount options.
Can you exchange a Seymour Duncan pickup for another?
If you’re not 100% pleased with the sound of your Seymour Duncan pickups, you can exchange them for up to 21 days after purchase. This offer applies to any pickups bought from an authorized Seymour Duncan dealer in the USA. A custom overwound P.A.F.-like humbucker (SH-5) with moderate output, perfectly voiced …
What is a custom 5 humbucker pickup?
Originally called the Custom Custom Custom, the Custom 5 high output humbucker pickup began life in our Custom Shop as a response to players requesting a brighter, alnico 5 version of the popular Custom Custom humbucker. It has a nice, full tone, a scooped midrange, and strikes a nice balance of bass & treble.
What kind of wire do you use for the custom 5?
Hand built in Santa Barbara, CA, the Custom 5 uses an alnico 5 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. Available in both standard humbucker or Trembucker spacing for 6-String, and in a passive mount 7-string configuration.
