Are Simmons hydrants made in USA?
Are Simmons hydrants made in USA?
Simmons 802LF 53 1/2″ Frost Proof Yard Water Hydrant – Made in the USA.
Where are Simmons hydrants made?
USA
Overall length of hydrant is bury depth plus 24 In. Polyester powder-coated finish. Individually boxed. Made in USA.
What is freeze proof hydrant?
The Frost Proof Yard Hydrant provides running water for lawn and garden, livestock and fire protection all year, even in sub-zero temperatures. Hydrant cannot freeze because when it is closed, all water in the standpipe drains out a hole in the valve which is set in the ground below the frost line.
How do you winterize a hydrant?
Therefore, for winter use, remove the hose and back- flow preventer, if used, using the quick disconnect supplied. Empty the reservoir by oper- ating the hydrant at full flow for 30 seconds to prevent hydrant freeze-ups. During this time you should notice the water flow is solid and then becomes aerated.
How deep should a yard hydrant be?
A hydrant should be buried below the frost line, which may be as deep as 4 feet or more in some places. Once the yard hydrant is attached to the well line, backfill it and turn on the water.
How do frost Proof Hydrants work?
Frost-free hydrants operate in freez- ing temperatures because when fully shut off, water in the riser pipe drains out into the bottom of the hole through a bleed off valve leaving nothing to freeze above the frost line. Partially closing the handle doesn’t allow water drainage, and the hy- drant may freeze.
What is a yard hydrant?
A yard hydrant is a piece of plumbing hardware that attaches to buried water supply pipe outside of a well. Yard hydrants are typically used to irrigate lawns and gardens, provide water to wash cars or on farms to provide water for livestock.
How do I know what model Woodford I have?
- On the “rim” of the faucet, under the handle, there should be a model number….
- Go to their website, http://www.woodfordmfg.com/woodford/WFDIndex.html for identification they have great illustrations etc.
- My solution was to order the “universal” kit that fits most models and lengths: http://amzn.to/2sgAhJT.
How does a frost free water hydrant work?
The water supply they are attached to is buried beneath the frost line and remains liquid. After the hydrant is closed, any water in the standpipe drains out, and the parts of the hydrant located above the frost line are completely empty. They can’t freeze shut because there isn’t any water in them.
How do you repair a frost free hydrant?
Repairing a Frost-Free Yard Hydrant Aaron Stickley. A frost-free yard hydrant repair can be as simple as replacing the rubber seal on the faucet mechanism of the hydrant. This means you can leave the hydrant’s long standpipe in place (no digging!) and simply unscrew the hydrant head to replace the seal.
What is a frost free water hydrant?
A frost-free hydrant can be thought of as a very long compression faucet. The horizontal water pipe running out to the hydrant location from the house must be buried deep enough to be below the frost line, which in some climates can be 4 feet or more below ground.
How do frost free hydrants work?
Frost-free Yard Hydrants. The valve is operated by a lever or wheel that is connected to the valve by a control rod. When the valve is open, water flows from the supply line, through the valve, up the riser pipe and out through the head of the hydrant. When the valve is closed, the flow of water stops, and a drain hole in the valve opens.
