Can water meter be read remotely?

Can water meter be read remotely?

Print. Yes! We have Pulse-Output Water Meters that have a pulse output that can be read remotely. For each unit of water that flows by the meter produces an electrical pulse that can be measured from a distance.

Is there an app to read my water meter?

With the mobileRDM application, utility workers can remotely check the status of service connections, read meters, and connect or disconnect water service all from an Android smart phone using a 2-way radio connection. The mobileRDM application then sends a high frequency radio signal directly to the meter.

Are water meters Wireless?

WaterTracker Systems This system handles up to 3 meters via wireless transmitters connected to the meters. The monitor provides an interface to view data locally, and that data can also be downloaded via USB cable to use in a spreadsheet on a PC.

What is the unit of water meter reading?

The meter read equals the gallons (or cubic feet) used while the flow rate equals the number of gallons (or cubic feet) per minute flowing through the water meter.

Are water meters Bluetooth?

Bluetooth Water Meters Bluetooth meters harness the power of Bluetooth low energy to communicate to a regional device or a hub, which in-turn can integrate with a local server or connect to a remote monitoring system over the Internet.

Are digital water meters accurate?

Although some utilities may consider the water meter to be a commodity and not as essential as meter reading technologies, investing in highly accurate, long-lasting meters matters. E-Series Ultrasonic meters are accurate to 1.5 percent over the normal operating range of the meter and 3 percent at extended low flows.

What is smart water meter?

The smart water metering enables the utilities to automatically collect consumption data, eliminate manual meter reading, improve efficiency and save costs. It also provides an opportunity to detect leaks and abnormal consumption more efficiently than the manual methods.

How long do smart water meters last?

Ten more have been installed at the city’s discretion and 100 or more are scheduled to be installed in the coming weeks. Traditional meters wear out and need to be replaced every 10 to 15 years.

How does your water meter get read?

To read a water meter, start by removing its cover. If you have an older, analog meter, write down the number that’s displayed on its large, circular dial. Then replace the last digit of that number with the number the meter’s needle is closest to.

How can I identify my water meter?

How to Find My Water Meter Walk out the front door of your home. Look for the front-most hose bib on the exterior of your home and walk toward the street, canvassing the front Look for the main water supply line on the exterior front or sides of your home if you do not find a box in the ground. Step onto the sidewalk or street.

Is your water meter accurate?

In new condition, a water meter measures the volume of water usage with 98 to 100 percent accuracy. After years of wear and tear, a water meter can register an incorrect number. But you can always have the water meter tested by the utility company or a plumber to make sure of its accuracy. Water Leak Detection

What is a ‘radio read’ water meter?

H2O Radio. H2O Radio is an automatic meter reading system that sends a low powered radio signal from a unit connected to your water meter. A computer equipped van drives down the street and automatically reads water meters. This allows GCWW to conveniently read your meter without entering your home.