Can you screw ModWood?
Can you screw ModWood?
Screw fixing We recommend as a minimum, galvanised coated screws for low corrosion areas and stainless steel screws for high corrosion areas. Screw down with low to medium torque. Do not ‘overdrive’ screws, particularly near the ends of the boards. Screw should finish ‘flush’ with top of board.
How much does ModWood expand?
ModWoods co-efficient of thermal linear expansion equates to approximately 3mm expansion and contraction in a 40 degree temperature variation for a 5 metre length. ModWoods coefficient of thermal linear expansion is 15 x 10-6mm/mm per degrees celsius.
Can you plane ModWood?
No it cannot, ModWood requires spacing between and behind the boards to ensure adequate ventilation so that the wood fibres have the ability to dry out. Therefore, this limits ModWood being able to be used in installations to provide primary weatherproofing element. Refer to the fixing instructions.
What length does ModWood come in?
ModWood Decking Specification Table
| Wide | Narrow | |
|---|---|---|
| Standard length | 5.4m | 5.4m |
| Joist centres | 450mm * | 450mm * |
| Ground clearance Clearance over concrete | 300mm 50mm | 300mm 50mm |
| Weight | 26.2kg/m2 | 25kg/m2 |
Is ModWood fire rated?
ModWood Flame Shield® Flame Shield® is tested and certified to AS 1530.8. Flame Shield® can be used in bushfire rated areas of BAL-12.5, BAL-19, BAL-29 and BAL-40.
Can you paint over ModWood?
Surface Coatings Most people do not use any coatings on ModWood, however it can be painted or stained at a later date should this be desired. Deck Protect Composite Refresh is a rejuvenating stain and it is available in the ModWood colours. In all circumstances you must follow instructions as stated on the packaging.
Is ModWood fire resistant?
ModWood Flame Shield® Flame Shield® can be used in BAL-12.5, BAL-19, BAL-29 and BAL-40 areas and gives you a traditional timber decking look and feel. Flame Shield® is a specially formulated ModWood with a fire retardant additive included.
Can you sand ModWood?
The brushed finish can be wire-brushed or lightly sanded with coarse sandpaper to remove scratches. The area you brush will quickly fade out and hide your repair.
What wood is most fire resistant?
Most well known hardwoods such as mahogany, oak, maple and walnut are the ones with the highest fire resistance. Hardwoods are naturally more heat resistant due to their thickness and density. This ensures that they take some time to burn when subjected to heat or fire.
Is ModWood hot to walk on?
The deck looks great Dirt just hoses off and it is not hot to walk on.
Can Modwood decking be installed over concrete?
Subject to local building codes, ModWood decking may be fixed over concrete, provided the concrete is in good condition and there is adequate “fall” to assist drainage. Battens (typically made from treated pine, steel, aluminium or fibre-glass) need to be an absolute minimum of 50mm in height, and would typically be approximately 50mm in width.
When should I Fix my decking boards?
Marina Projects refer to Further Information before calculating. As ModWood expands in heat and sun, to avoid building stress into your deck and having possible lengthways shrinkage, it is best to fix your decking boards when the ambient temperature is less than 25 degrees celsius and when the boards are not sitting in full sun.
Can ModWood be used as a batten or support?
Battens (typically made from treated pine, steel, aluminium or fibre-glass) need to be an absolute minimum of 50mm in height, and would typically be approximately 50mm in width. ModWood itself is not to be used as a batten or support. If necessary, the battens may be tapered to keep the deck level.
What is the ModWood maintenance calculator and how does it work?
The ModWood Maintenance Calculator highlights the long term benefits and savings of a ModWood deck versus a traditional timber deck. This application calculates the approximate cost of ModWood required for your project and compares it to the initial, and ongoing maintenance cost, of using timber.
