Can you use an RCA cable for a subwoofer?
Can you use an RCA cable for a subwoofer?
Any single, standard RCA or subwoofer cable should do just fine. The other end of the cable will be plugged into the L/LFE (white) RCA jack on the back of your sub. Any cable designed for subwoofer use should be just fine.
What is line level input in subwoofer?
Line level also means the signal to the subs is not affected by the interaction of the amplifier’s output impedance with the speaker’s input impedance, and there are fewer gain stages to add noise and distortion.
What kind of cable is needed for a subwoofer?
RCA
Regardless of what type of connection is available, be it RCA or direct wired, it is highly recommended to use shielded, heavy gauge cabling specifically designed for subwoofers. Such cables provide a cleaner, more noise-free audio signal. The image below shows two subwoofer outputs.
How do I hook up a subwoofer to my RCA cable?
Connect Using Stereo RCA or Speaker Level Outputs If the subwoofer’s LINE IN uses RCA cables and the subwoofer out on the receiver/amplifier also uses RCA, plug it in using an RCA cable. If the cable is split on one end (a y-cable for both right and left channels), plug it in the R and L ports on the subwoofer.
How do I connect subwoofer to speaker level output?
How to Connect a Subwoofer to Speaker Level Outputs
- Check the specifications on your receiver.
- Check the specifications on your subwoofer.
- Use two speaker wires to connect to the front and back of the sub on the left and right audio channels.
- Adjust the filter on the subwoofer to clarify the audio.
- Enjoy the bass.
What’s the difference between line level and speaker level?
Speaker level signals are post-amplification. After a line-level signal enters an amplifier, it exists to the speakers at what is called speaker level. These signals are much higher in voltage than line level and require speaker cables for safe signal transfer.
How do I connect my subwoofer to speaker level inputs?
What RCA cable do I need for my subwoofer?
If your subwoofer has a single RCA subwoofer input jack, you may want to pick up a “Y” RCA adapter to combine both receiver channels on the output side into a single mono RCA plug. Subwoofers with 2 (stereo) RCA jack inputs will need a standard stereo male-male RCA cable. On sale now! PRO Series 2-Channel High Power Line Output…
How do you convert speakers to RCA?
Speaker To Rca Line Level converter adaptor High to Low – Adjustable: This Hi-Low adapter is ideal when adding a aftermarket amplifier to a factory head unit. It takes the signal from a pair of speakers and converts it into a low level signal (RCA’s) so that you can plug them into your aftermarket amp.
How do you connect a subwoofer to a receiver?
You then connect RCA cables (or a single cable, depending on your particular one) to your powered subwoofer. The internal electronics not only scale down the speaker output voltage from a receiver but also help prevent noise from the audio path, too. Most, but not all, speaker level adapters do not need a power source.
What does the “1” mean on a subwoofer?
The “.1” is used to represent a sound channel limited to only bass for subwoofer use. Older amplifiers and receivers don’t provide a subwoofer output so we’ll need to connect a subwoofer using some other ideas. Shown is an example of a powered subwoofer’s rear panel with 2 kinds of inputs: speaker inputs and RCA (low level) input jacks.
