Can you use spot putty over primer?

Can you use spot putty over primer?

You can use glaze putty over primer. Either pin holes or lows or something that pops up after it’s been primed on occasion. Let me give you one hint to help you, and you may be doing this, but use a Guide Coat in your body filler stages.

Can I put spot putty over paint?

Can Spot Putty Be Applied Over Paint? You can use it to fill pinholes in body filler as well as to cover minor scratches on metal, fiberglass, and wood, as well as to paint and prepare sanded, primed, or sanded and painted surfaces.

Can you put spot putty over bare metal?

Putty, like paint, adheres better and stays intact when applied to bare metal. So make sure you completely remove all oil, grime, solvent, rust, and paint from the surface. Before using auto putty be sure to use a Scotch-Brite pad to scuff the surface of primed metal to give the putty something to adhere to.

Can Dolphin Glaze be applied over primer?

Do not apply over etch primer. Original paint surfaces – degrease and abrade with P180 – 320 abrasive. 100 parts by weight DOLPHIN BODY FILLER polyester filler, 2 parts by weight U-POL hardener for polyester fillers. The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time.

Should putty be primed?

Priming will help the new putty adhere and add another layer of protection. Be sure to prime all of the bare wood, brushing it into all the corners and hard to reach spots. Any primer you get on the glass can easily be scraped away when dry. When the primer is dry you can begin to putty the window.

How long before you can sand spot putty?

Allow the glazing putty to dry. If you are using a two-part (catalyzed) glazing putty, this should not take longer than an hour. If you are using one-part, it can take up to a day. Using a fine grit sandpaper (320 or up) sand the area once again, taking care to keep the sandpaper level and pressure applied equally.

Will high build primer fill pinholes?

Any high-quality automotive primer will cover and hide the scratches. Pinholes are not so easy to fix. Pinholes are the tiny voids, bubbles, and pits caused by air that got mixed into the dry micro. Unfortunately, primer is very thick and does a horrible job of filling pinholes.

How soon can I paint over putty?

Believe it or not it actually takes between 8-12 weeks before its dry enough to be decorated. Some people don’t leave it this long but we recommend you do. One of the reasons putty has been used by glaziers for so long is that if painted it never really goes hard and dries out completely.

How soon can you paint after putty?

It is essential to keep in mind that the wall putty must be applied to the walls only after the first primer coat has dried. It fills in the imperfections on the surface and even on the slightest of cracks. It offers a defensive sub-layer for the paint.

How do you use scratch filling putty?

You will want to put the scratch filling putty on the towel that comes with the kit and wipe it over the damaged area. After you finish wiping the scratch filling putty over the damaged area, you will want to remove any extra material. You can do this by using the excess paint and putty remover.

How to remove deep scratches from car paint?

After you touch-up the spot, regardless of how much paint you used, let the paint dry. Once the re-painted area is totally dry, you should see that the deep scratch in your car has successfully blended in—like magic, it should completely disappear.

What can you use spot and glazing putty for?

This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels. Use it for filling pinholes in body filler as well as for covering minor sand scratches, and more on metal, fiberglass and wood as well as sanded and primed or sanded and painted surfaces.

Can you put glaze putty on top of primer Surfacer?

So you’ve got the Primer Surfacer on there. You’ve got it blocked out it, looks good, but you find that there’s a low there. You can put glaze putty on there like Metal Glaze. There’s a lot of different brands but the glaze is designed to go over 2K Cure Primer if it’s dried. But there is something you wanna do.