Do MP rotators save water?
Do MP rotators save water?
The multiple rotating streams of the MP Rotator apply water more efficiently. This increased efficiency results in 30% less water use when compared to traditional sprays.
How long should MP rotators run?
9-12 minutes
MP Rotator vs. Regular Spray Nozzles
| Characteristics | Standard Spray N ozzle |
|---|---|
| Range of Radius | 1.5m to 5.2m |
| Application Rate – e.g. for a 4.5 meter radius full circle reticulation nozzle | 15.81 litres per minute (LPM) |
| Typical Retic Run Time | 9-12 minutes |
| Pros | Cheap Quick run time |
How many MP rotators can you put on a zone?
The standard MP Rotators have a matched precipitation rate of approximately 0.4 in/hr. This means any standard MP Rotator at any arc or radius can be placed on the same zone….Customer Type:
| Body Color | Black | Grey |
| Radius (ft.) | 8-35 | 6-16 |
| Warranty | 3 Years | 3 Years |
| FEATURES | ||
| Arc | 45-360 | 90-360 |
What does MP Rotator stand for?
Matched Precipitation
MP stands for Matched Precipitation. An MP rotator is water saving irrigation equipment that converts spray heads easily. MP rotators reduce water use while making the irrigation systems more efficient. MP Rotator Sprinkler Heads. Reduce Your Use!
Can you mix rotary and spray sprinklers?
Rotor heads, spray heads, matched precipitation etc all throw water at a different rate. Mixing them in the same zone will waste large amounts of water, and create a huge imbalance that causes overwatering and underwatering.
What sprinkler head is best?
The 10 Best Sprinkler Heads for Small & Large Lawn
- Orbit 55662 Adjustable Pop-Up Gear Drive Rotor Sprinkler.
- Toro 53814 4-Inch Pop-Up Fixed-Spray.
- Orbit 55025 Satellite 2 Impact Sprinkler.
- Gilmour 167H Pulsating Sprinkler Head.
- Hunter PGP Ultra Rotor Sprinkler Heads – 5 Pack.
- Rain Bird CPRSDBEX Wired Rain Sensor.
How deep do you trench for sprinklers?
6 to 12 inches
Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area’s freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.
When did Hunter introduce the MP Rotator?
1981
In 1981, the small Hunter team introduced the gear-driven PGP® Rotor to the world of irrigation. The proprietary product started what is now referred to as “The Rotor Revolution” in the landscape irrigation industry.
Are rotary nozzles better?
The pros. Generally, rotor heads are the better choice for larger areas of turf. They have a low precipitation rate, so they will evenly cover more area over a longer period of time. This is ideal for sloped areas because it allows more time for water absorption.
Can you replace a spray head with a rotor head?
A replacement sprinkler head doesn’t have to be the same brand as the broken head. But it does have to be the same type: pop-up (stationary, rotor- or gear-driven rotor) or impact. And the new head must also match the inches-per-hour (iph) or gallons-per-minute (gpm) delivery rate of the old head.
