Other

Does ASUS have an Ethernet port?

author 0

Does ASUS have an Ethernet port?

That is correct, the 12mm thick Zenbook UX305 from ASUS does not have a LAN port, it is wireless or nothing for this ultrabook. It does have three USB 3.0 ports, a micro HDMI, a 3.5mm jack for audio and an SD card reader so you will be able to use some wired peripherals with this ultramobile device.

How do I enable Ethernet in ASUS BIOS?

Check that Ethernet LAN is enabled in BIOS:

  1. Press F2 during boot to enter BIOS Setup.
  2. Go to Advanced > Devices > Onboard Devices.
  3. Check the box to enable LAN.
  4. Press F10 to save and exit BIOS.

How do I enable Ethernet on my PC?

Enabling adapter

  1. Open Settings.
  2. Click on Network & Security.
  3. Click on Status.
  4. Click on Change adapter options.
  5. Right-click the network adapter, and select the Enable option.

What if my computer doesn’t have an Ethernet port?

In situations like these, if there is a wired Ethernet network available you can connect to it using the USB-A or USB-C port on your laptop and a USB to Gigabit Ethernet Adapter. Plug the adapter into your laptop’s USB port and use a Cat5e/6 Ethernet patch cable to connect the RJ45 end to the network.

How do I install Asus Ethernet driver?

Method 2: Download and update your Asus network driver via the Asus website

  1. Go to the official Asus website.
  2. Click Products on the menu, then select Networking > Wireless Adapters.
  3. Select your Asus network adapter model.
  4. Click Support on the upper right.
  5. Click Driver & Tools.

Why won’t my Ethernet work on my PC?

If Wi-Fi is disabled and you’re still not getting a network connection, make sure that ethernet is enabled in the same Network and Internet Settings section. Find the right network. If that doesn’t work, swap ethernet cables—even if you have to borrow or buy a new cable to do so.

How do I know if my Ethernet cable is working?

Check the status lights on the back of the Ethernet card. On most Ethernet adapters, a steady green light means that the Ethernet connection on the computer is active and connected to a valid partner at the opposite end.

How do I fix an unplugged Ethernet cable?

Right-click on your Ethernet connection and select “Disable” from the list of options.

  1. Unplug the wired connection and shut down your computer. Take out the master cable (if it is a PC) or take out the battery (in case of a laptop).
  2. Wait for around 10 minutes.
  3. Now enable the adapter the same way we disabled it.

author

Back to Top