Contributing

Does D-Link DIR-825 support repeater mode?

author 0

Does D-Link DIR-825 support repeater mode?

To use your DIR-825 as a repeater, the software version will need to 1.02 or 3.01-3.06. Firmware version 7.00 is not supported. 1.

How do I setup my Dlink DIR-825?

Configuration for D-Link DIR-825

  1. Visit the router’s IP address (http://192.168.0.1) in a new browser window.
  2. Enter the router password.
  3. Click on the Manual Internet Connection Setup button at the bottom.
  4. Enter the OpenDNS addresses in Primary DNS Server and Secondary DNS Server fields.

How do I limit bandwidth on my Dlink router DIR-825?

Login to your router >> Check for Bandwidth Control Option >> Enable and set bandwidth.

Is DIR 825 MU MIMO?

The DIR-825 AC1200 MU-MIMO Wi-Fi Gigabit Router features dual-band wireless, allowing you to operate two concurrent, high-speed Wi-Fi bands for ultimate wireless performance. Surf the web or make important Internet phone calls on the 2.4 GHz band, while simultaneously streaming digital media on the 5 GHz band.

Does DIR-825 have MU-MIMO?

D-Link DIR-825 MU-MIMO Gigabit Wireless Router, Dual Band, 1200 Mbps Wi-Fi Speed, 5 Gigabit Port, 4 External Antenna, Router | Access Point |Repeater Mode, Black.

How do I change my Dlink DIR 825 WiFi password?

How do I change my D-Link Router’s password?

  1. Step 1: Open your Internet browser and enter.
  2. Step 2: Enter the password for your Admin account in the field provided.
  3. Step 3: Locate the Wireless Settings from the drop down menus.
  4. Step 4: In the Password field, specify the new wireless password for the desired wireless band.

How do I reset my Dlink 825?

This FAQ applies to hardware revision B

  1. Step 1: With the unit on, use the end of a paperclip to press the reset button, which is located inside a small hole on the base of the unit.
  2. Step 2: Using the paperclip, press and hold the reset button for more than ten seconds.
  3. Step 3: The unit will reboot automatically.

author

Back to Top