Does toplac need undercoat?

Does toplac need undercoat?

ALL SUBSTRATES: Use PreKote undercoat. If spray applying Toplac, PreKote must be aged a minimum of 14 days. If this is not possible Perfection Undercoat can also be used as an undercoat. Method Sand the undercoat smooth with 320400 grade (grit) wet or dry paper.

Does toplac need primer?

Sand well using 180220 grade paper. Clean thoroughly and allow to dry.No primer requiredанаapply PreKote direct to GRP.

How many coats does toplac have?

International Toplac Instructions For Application It can be applied with a brush, roller or conventional spray, although spray is recommended for professional use only. 2-3 coats are recommended however only one is required if you are just doing a touch up.

What is bilge paint for?

Bilgekote protects bilges, lockers and bulkheads from moisture penetration and wear and tear. It also resists oil and fuel spillage, and cleans easily.

Does Danboline need a primer?

No priming necessary. Method Sand the primer using 180-280 grade wet or dry paper. Remove dust with a dust wipe. Apply 1-2 coats.

How long does Danboline take to dry?

How long does Danboline take to become touch dry? At 5C – 16 hours.

How do you use Bilgekote?

Method Apply 2-3 coats of Bilgekote following the proper dry times. Sand between coats using 220-320 grade (grit) paper. Remove sanding residue with a rag dampened with Brushing Liquid 333. Bilgekote may be applied by roller and brush using the roll and tip method.

How do you use Danboline?

How can Danboline be applied? Application can take place via paint brush, roller or conventional spray, although spray is recommended for professional use only. 1-2 coats are recommended.

How do you use an interlux Bilgekote?

What is Toplac paint?

Toplac is a range of high-performance colours with a solid reputation, and has been admired on yachts and boats of all sizes for decades. With a rich colour that stays glossy over time, Toplac is the trusted solution when a high-quality topcoat finish is required.

Can I buy Toplac in the UK?

With a rich colour that stays glossy over time, Toplac is the trusted solution when a high-quality topcoat finish is required. There are many stores that sell International products throughout Great Britain. Find a stockist that’s near you. There are many distributors of International products throughout Great Britain.

Can you mix matting a with Toplac?

A matting additibe for mixing with 1 pack International finishes and varnishes to produce a satin or matt effect finish. A 1:1 mix with Toplac produces a similar gloss level to Goldspar Satin varnish. May be added up to 25:75 by volume for a flat-matt finish. For interior and exterior use.

Can you use PreKote under Toplac?

Intended Use: DIY and Professional. PreKote is a easy to use primer/undercoat for fibreglass, or undercoat for primed wood/steel. Perfect for use under Toplac. For all other colours – add up to 50% Toplac to Pre-Kote White. Thinners No. 1 Coverage: (Practical) – 12 m²/lt by brush/roller.