Popular guidelines

How can I configure my MTNL ADSL modem?

author 0

How can I configure my MTNL ADSL modem?

  1. Enter IP 192.168.1.1, in Internet Explorer after connecting the router as before(As in ADSL Router without wifi capability)
  2. Enter User Name Password as before(As in ADSL Router without wifi capability): i.e. admin, admin.
  3. Click Tab Interface Setup shown below:

How do I setup a Dlink DSL-2750U as a modem and router for ACT Broadband +( rj45 LAN cable?

:: WAN Configuration ::

  1. Connect the ISP provided broadband Ethernet jack into the Lan4 port of your router.
  2. Input the WAN IP Settings that are provided by your ISP for your connection.
  3. Now click Apply and the router should be connected to the internet successfully.

How can I reset my MTNL modem?

Press the reset button (which is available on right hand rare side of Modem.) & hold till the all lamps will glow. After Resetting the modem you will get Internet.

Does Dlink 2750u support FTTH?

FTTH is a fiber optic internet service so the DSL-2750U will not work with it.

How do I connect the dsl-2750u to my Device?

The DSL-2750U connects two separate physical interfaces, an ADSL (WAN) and an Ethernet (LAN) interface. Place the Router in a location where it can be connected to the various devices as well as to a power source. The Router should not be located where it will be exposed to moisture or excessive heat.

What are the benefits of the dsl-2750u?

This eliminates the need to reconfigure every host whenever changes in network topology occur. Network Address Translation (NAT) – For small office environments, the DSL-2750U allows multiple users on the LAN to access the Internet concurrently through a single Internet account.

What is included in the package of dsdsl-2750u Wireless N 300 ADSL2+ Modem Router?

DSL-2750U Wireless N 300 ADSL2+ Modem Router  Power Adapter  CD-ROM with User Manual  One Micro Splitter  One twisted-pair telephone cable used for ADSL connection  One straight-through Ethernet cable  One Quick Installation Guide Note:Using a power supply with a different voltage rating than the one included

Does the dsl-2750u ADSL router support PPP (Password Authentication Protocol)?

The DSL-2750U ADSL Router supports PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) for PPP connections. The Router also supports MSCHAP. DHCP Support – Dynamic Host Configuration Protocol automatically and dynamically assigns all LAN IP settings to each host on your network.

author

Back to Top