How do I access my Cisco Linksys router?

How do I access my Cisco Linksys router?

How to access the router’s web interface

1. Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
2. Enter your login credentials in the fields provided. The default password is admin.
3. To know if you have successfully logged in to the web interface, the screen below should appear.

How do I find the IP address of my Linksys router?

1. Click Network.
2. Click on Wi-Fi then click the Advanced… button.
3. Select TCP/IP. Your router’s local IP address should be displayed in the Router field. In the example below, the local IP address of the router is 10.150. 104.80.

How do I access my PLDT router?

Type 192.168. 1.1 (the most common IP for PLDT routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your PLDT router is adminpldt. The default password is 1234567890.

How do I find out my WiFi IP address?

For Wi-Fi connection

1. Select Start > Settings > Network & internet > Wi-Fi and then select the Wi-Fi network you’re connected to.
2. Under Properties, look for your IP address listed next to IPv4 address.

How do I access my Linksys router?

Open a supported Web browser (Ex. Internet Explorer) and in the address bar enter the IP address of your Linksys router.

You will be prompted for the user name and password.

Next, click on the Status tab.

How to log into Linksys router?

Connect an Ethernet cable from your access point to your computer.

Assign a static IP Address on your computer.

Open a web browser, type 192.168.1.252 in the Address bar and press[Enter].

On the authentication window that will appear, enter the default username and password “admin” in both the Username and Password fields then click…

How to find your wireless router’s web address?

How to Find Your Wireless Router’s Web Address Pull up File Explorer. Open up a new window in Windows Explorer (File Explorer, for Windows 8 folk) by hitting the Windows Key + E shortcut on your keyboard. Click on the Network icon. If you’re lucky, Windows will self-identify your wireless router within Windows/File Explorer itself. Pull up a Command Prompt. Summon Your Gateway. Read the Numbers.

How to setup VPN on Linksys router?

Open your browser and type the IP of the Linksys router in the address bar. The software prompts you for a username and password.

Click the “Security” tab and select “VPN”.

Select “IPSec VPN Tunnel” from the “Tunnel Entry” listbox.

Enter the tunnel name in the textbox. This can be any name you wish that is recognizable to you.

Select “Subnet” from the listbox in the “Local Secure Group” section. Enter the internal IP address. Typical internal, small home networks