How do I adjust my water heater thermostat?
How do I adjust my water heater thermostat?
Here’s how to adjust the temperature on your electric hot water heater thermostat:
- Turn off the power to your water heater.
- Next, locate the thermostat(s) on your water heater.
- Once you have removed the control panel, adjust the temperature dials to be hotter or cooler based on your temperature needs.
What temperature should water heater be set?
120 degrees Fahrenheit
120 degrees Fahrenheit is the safety recommendation against scalding, but 140° is the common default setting. Most experts agree that anything below 120 degrees creates a risk for bacteria to develop inside your water heater from stagnant water, such as legionella that causes Legionnaire’s disease.
Why does my water heater have 2 thermostats?
An electric storage-tank-style water heater has two thermostats because it has two heating elements. The thermostats are designed so only one element is active at a time. The reason only one element is active at a time is because it allows for smaller wire sizes and lower amperage demand when in operation.
What level should water heater be on ABC?
around 115 to 120 degrees Fahrenheit
Know the Ideal Setting: The best setting for gas water heaters is around 115 to 120 degrees Fahrenheit. Oftentimes, water heaters will have additional options to either lower or increase the temperature of the water inside. In the case of the video’s water heater, A, B and C each have an increase of about 10 degrees.
Is 50 degrees hot enough for hot water?
So, what is the best temperature range for your water heater? The EPA recommends 120 degrees because it’s hot enough to keep diseases at bay, it’s not hot enough to cause scalding, it will supply enough hot water for most small families and is relatively energy-efficient.
Which water heater thermostat should be set higher?
4 Answers. Setting the top element slightly higher helps the elements to be used evenly. If you set them to the same temperature, the bottom element will be the first one on every time, and frequently the only one used to maintain the temperature.
Is 120 degree water hot?
One was the “use temperature” and the other was “the maximum temperature” to prevent scalding. It’s generally agreed that 120 degrees Fahrenheit is the maximum safe hot water temperature that should be delivered from a fixture. Therefore hot water above 120 degrees Fahrenheit can be considered hazardous.
How do I increase hot water heater?
Twist the dial on the bottom of the water heater to change the temperature. Gas water heaters are easy—they feature a single knob that controls the amount of heat being directed to the unit. Turning this knob to the left (counterclockwise) will crank up the temperature, making the water hotter.
Is 60 degrees too hot for water?
In general, hot water is 130 F (54.4 C) or above. Warm water is between 110 and 90 F (43.3 to 32.2 C). Cold water is generally between 80 and 60 F (26.7 to 15 C).
