How do I build a fireplace surround?

How do I build a fireplace surround?

Starts here6:01Building a DIY Fireplace Surround and Mantel | Free Plan – YouTubeYouTubeStart of suggested clipEnd of suggested clip38 second suggested clipIt’s best to attach these two studs. But if there’s no studs in the area at least use drywallMoreIt’s best to attach these two studs. But if there’s no studs in the area at least use drywall anchors the fireplace surround is meant to stand on its own but these cleats.

Can a fireplace surround be wood?

Is Wood Safe for Fireplaces? International Residential Code, a model code adopted by many municipalities, does allow for combustible materials, such as wood sheathing, to be placed directly on fireplace surrounds. However, all combustibles must remain at least 6 inches from the opening.

How do you build a fireplace bump?

Starts here3:59How to build a Bump Out For a fireplace – YouTubeYouTube

Can I use cement board around a fireplace?

You can use Hardiebacker board around your fireplace. However, using fiber cement board like Hardieboard is acceptable in locations including the mantel and fireplace surround.

How far away should mantel be from fireplace?

12”
Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box. The main factor for distance will come down to the Face Height of your mantel.

What material can you put around a fireplace?

Steel, concrete and stone are the most modern options, tile is a more traditional option, and brick can be either modern or traditional (depending on the design) for a fireplace surround.

Do I need fire bricks in my fireplace?

The concept of a firebrick is extremely simple; it reflects heat back into the firebox while maintaining a degree of protection for the inner steel area of the firebox. It is therefore essential that you check your firebricks on a regular basis to ensure that they are not cracked or damaged in any way.

How do you frame out a fireplace bump?

What is the floor around a fireplace called?

The floor or ledge on your fireplace that extends into the room, as well as the wall around and above the fireplace is called the hearth. Fireplace hearths serve an important purpose as well as draw attention to the fireplace as a focal point in the room.

How to frame a fireplace?

Building Your Fireplace Base. This first step is vital since it determines where everything else will go.

Building the Fireplace Frame. Starting with a flat surface is the easiest way to complete this task.

Using Plywood to Cover the Fireplace Base.

Fixing the Surround Frame to the Plywood Covered Base and Wall.

Covering the Fireplace Frame with Plywood.

How to build a fireplace mantle?

Place a drop cloth on the floor around the hearth to catch falling soot and debris. Locate and loosen the brackets that secure the old fireplace doors.

Mantles are usually 60 inches off the floor. With a tape measure,mark a line 60″ above the floor.

Position the 2×4 mantel brace on the line at the center point.

How to build a fireplace mantel shelf?

Outside Corner#1. Step one is marking and cutting the first outside corner.

Outside Corner#2. Now you can measure for the finished length of the mantel-shelf.

Sizing Corbels. Size the corbels as necessary.

End-Matching. Despite my best efforts,my cuts weren’t furniture-grade perfection.

Ledger Board.

Shelf Installation.