Popular guidelines

How do I change IDE to AHCI without repairing reinstalling Windows?

author 0

How do I change IDE to AHCI without repairing reinstalling Windows?

How to Switch from IDE to AHCI without repairing/reinstalling…

  1. Run the Registry Editor (regedit.exe)
  2. Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci.
  3. Set the “Start” value to 0 (zero)
  4. Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide.

How do I change SATA mode after installing Windows?

Change to RAID mode from AHCI mode and vice versa:

  1. If currently installed, uninstall your RAID or AHCI SATA driver (for intel, intel rapid storage technology)
  2. Basically open msconfig -> boot tab -> check safe boot -> restart.
  3. Go into UEFI/BIOS and set SATA mode to which ever one you want.
  4. Boot up into windows safe mode.

Should AHCI be enabled for HDD?

Why it’s better to enable AHCI? Enabling the AHCI mode in conjunction with a fast hard disk drive can provide a good boost in computer speed, as its writing speed can increase by 10-20%. By enabling AHCI, users will save time each time when they write files.

How do I enable AHCI mode for SATA on my computer where Windows is already installed?

In UEFI or BIOS, find SATA settings to select the mode for memory devices. Switch them to AHCI, save settings and restart the computer. After the restart, Windows will start installation of SATA drivers, and when it is over, it will ask you for another restart. Do it, and AHCI mode in Windows will be enabled.

Can I change to AHCI after install?

Restart the computer and go to UEFI or BIOS. Switch them to AHCI, save settings and restart the computer. After the restart, Windows will start installation of SATA drivers, and when it is over, it will ask you for another restart. Do it, and AHCI mode in Windows will be enabled.

Can I enable AHCI after install?

Enable AHCI After Win 10 Installation via CMD Step 1: Type Command Prompt in the Cortana’s search box and run Command Prompt as administrator. Step 2: Type the bcdedit /set {current} safeboot minimal command and then hit Enter. Step 3: Boot your computer into BIOS and then enable AHCI mode.

How to activate Godmode in Windows 10, 8,?

Steps To Activate ‘God Mode’ On Windows 7,8 and 10 You need to right-click on the desktop and then create a new folder. Now you need to Right-click on the newly created folder, and there you have to select the option “Rename” and paste the following code: GodMode. {ED7BA470-8E54-465E-825C-99712043E01C} Once you have replaced the name, you will see an icon that looks like a control panel.

How do I access safe mode?

You should keep tapping the F8 key and not just press the key. An easier way is to access safe mode from normal mode by selecting Start, Control Panel , Run, type msconfig and press the ENTER key. Select the Boot tab and check the box before Safe Boot. Click on Apply and OK.

How do I enable AHCI in BIOS?

Open an elevated command prompt and run the following command to enable Safe Mode boot: Restart the computer and boot to the system BIOS. Change the ATA Drive setting from ATA/IDE Mode to AHCI Mode, press enter to accept the change. Click Yes to the Warning about the detected mode change on the embedded ATA controller.

author

Back to Top