How do I configure multisensor 6 to work with openHAB?
How do I configure multisensor 6 to work with openHAB?
You may send in any configurations or commands from your current gateway to configure your Multisensor 6. Tap the Action Button on Multisensor 6 to put Multisensor 6 back to sleep, or wait 10 minutes. (recommended to manually put it back to sleep to conserve battery life). If none of this helps, you can turn on DEBUG logging in the openhab console.
How do I configure multisensor 6?
Waking up Multisensor 6. In order to configure Multisensor 6, you must either (1) wake up Multisensor 6 using the below button press function, or (2) temporarily put your Multisensor 6 on USB power. Press and hold Multisensor 6 Action button Wait until the RGB LED turns into a Yellow/Orange Color Release Multisensor 6 Action Button
How do I put multisensor 6 back to sleep?
Tap the Action Button on Multisensor 6 to put Multisensor 6 back to sleep, or wait 10 minutes. (recommended to manually put it back to sleep to conserve battery life). If none of this helps, you can turn on DEBUG logging in the openhab console. a vendor and technology agnostic open source automation software for your home
Does the multisensor work on RPI 3?
The motion sensor and tamper functions on the Multisensor do not work. The temperature, luminance, UV, humidity and battery functions all appear to be reporting as expected. I’m running OH2 on RPi 3 with a Razberry zwave interface board.
What is multimultisensor 6 and how is it different?
MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products.
What is 6-in-1 Z-Wave Plus multisensor?
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor. Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight. Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera. Z-Wave Plus certified.
