How do I connect my D-Link DIR-615 to another router?
How do I connect my D-Link DIR-615 to another router?
Configuration for D-Link DIR-615
- Visit the router’s IP address (http://192.168.0.1) in a new browser window.
- Enter the router password.
- Click on the Manual Internet Connection Setup button at the bottom.
- Enter the OpenDNS addresses in Primary DNS Server and Secondary DNS Server fields.
How do I use my DIR-615 as a wireless bridge?
You can log into the D-Link router > Search for Wireless Mode and Select Bridge Mode. This will allow you to scan and connect to the Wi-Fi of the DIR-615. Once connected you can plug the PC into the LAN port of D-Link and check for internet.
How many devices can connect to D-Link DIR-615?
D-Link recommends 15 simultaneously connected users as the maximum number.
How do I setup two wireless routers on the same network?
Set the Internet Gateway of router 2 to router 1’s IP address. Connect the two routers using a wired connection from any of port 1-4 in router 1 to any of port 1-4 in router 2. You can use a Wireless Media Bridge or Powerline Ethernet Kit to create a wired connection. DO NOT use router 2’s WAN port.
How do I log into my DIR-615 router?
You should now have access to your DIR-615 router at http://192.168.0.1/ with the Admin username and a blank password.
What is D-Link Bridge mode?
Bridge mode allows you to configure your “Bridge Mode” supported router to connect to an existing wireless network. Once connected, you can wire devices into the router to provide network and internet connectivity.
What is the default password for D Link?
Enter default username and password for D-Link router. In most cases, the default username and password are “admin.” In some router password is “password.” This username and password vary from router model to model.
What is D-Link default IP address?
Open the router in a new browser tab. Open your browser and navigate to http://192.168.0.1,the default IP address of the D-Link router.
How do I log into my router?
On a computer or device connected to your modem router, launch a supported browser, enter “http://192.168.1.1” in the Address bar and then press[ENTER].
How do I update my router firmware?
To check for new firmware and update your router: Launch a web browser from a computer or WiFi device that is connected to the network. Enter http://www.routerlogin.net. Enter the router user name and password. Click ADVANCED > Administration. Click Firmware Update or Router Update. Click Check. Click Yes.
