Common questions

How do I connect my Etisalat D-Link?

author 0

How do I connect my Etisalat D-Link?

How do I set up and install my router?

  1. Step 1: Unplug the power to your cable/DSL Internet modem.
  2. Step 2: Connect an Ethernet cable from your computer to a LAN port (Port 1,2,3 or 4) on the DIR-850L.
  3. Step 3: Connect your cable/DSL modem to the Internet port on the DIR-850L.

How do I access D-Link settings?

Step 1: Open your web browser and enter the IP address of the router into the address bar (not in google). The default IP is 192.168. 0.1, or using the link: http://dlinkrouter.local. Step 2: You should be taken to a D-Link login page.

How do I change my Dlink network settings?

Step 1: Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar.

  1. The default username is Admin and the password is blank (nothing).
  2. Step 3: Click on Manual Wireless Network Setup.
  3. Step 4: Next to SSID, type in a new SSID.

How do I access my Etisalat router settings?

Log in to the web-based setup page of your Etisalat router to obtain the information you need. NOTE: Usually, you can access the Etisalat router through 192.168. 1.1 (refer to the router’s label or get the information from Etisalat about the username and password). a.

How do I change my Dlink WIFI password Etisalat?

How do I change the Wi-Fi Password on my router?

  1. Step 1: Open an Internet browser (such as Internet Explorer) and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar.
  2. Step 2: Enter the password for your Admin account in the field provided.

How do I check my Dlink router settings?

Step 1: Open your web browser and type in the IP address of the router (192.168. 0.1 by default). Step 2: Enter the username (admin) and password (blank by default), and then click OK or Log In.

How do I change my WIFI frequency Dlink?

Alternatively, set the channel manually. Click the down-arrow button beside “Wireless Channel.” Select your preferred channel, from channel 1 to channel 11, from the pull-down menu. Click “Apply Settings” to save and implement the changes.

author

Back to Top