How do I connect my Miroir projector to my iPhone?
How do I connect my Miroir projector to my iPhone?
How to Connect:
- Connect the projector to a wireless network.
- On the iOS device, download and install the Miroir Wireless App.
- Once installed, launch the Miroir Wireless App.
- While on the projector’s home screen, pres the Input button on the remote.
- Select DLNA on the pop up menu.
How do I connect my Miroir mini projector?
Setup
- The projector can be powered using the included Micro USB to USB cable or the built-in battery.
- Connect the included HDMI cable to the HDMI port on the projector and the other end to your device.
- If desired, connect a speaker to the 3.5mm audio out jack.
How do I adjust the brightness on my Miroir projector?
Location of Parts and Controls Mode Control – Press for auto focus and auto keystone adjustments. Press and hold to turn ECO brightness mode on or off.
How do I reset my Miroir projector?
IMPORTANT: Fully charge the battery before the first use (approximately 3-4 hours). Reset button – Press to reset the projector. This button is a small recessed button, so you will need something small, such as a paper clip, to press the button.
Why is my Miroir projector not working?
These are the most common reasons you may be seeing the “No Signal” message: The projector and the source device are not connected correctly. Check that the cables and adapters are firmly plugged in. Check that you are using the proper cable and/or adapter to connect your source device to the projector.
How do I update my Miroir projector?
Follow the instructions below to update your projector:
- Plug your projector into power using the charging cable and the power adapter.
- Power your projector on and allow it to fully start up and load the home screen.
- Select System Update .
- Select Check for Updates. If an update is available, select Install Updates.
How do I activate my Miroir projector?
The unique 6-digit activation code can be found on your sales receipt. Digits are entered using the volume up [+] and volume down [-] buttons on the projector. These buttons are located on the side of the projector. Press the volume up [+] button to scroll through numbers from 0 to 9.
How do I update my projector software?
Installing Software Updates
- Plug your projector into power using the charging cable and the power adapter.
- Power your projector on and allow it to fully start up and load the home screen.
- Select System Update .
- Select Check for Updates. If an update is available, select Install Updates.
Why is the projector not working?
If your projector doesn’t power on, try the following: Ensure the projector is properly plugged into a working outlet. Check the temperature lights to make sure the device hasn’t overheated and shut down. If you are using a remote control to turn on the projector, check the batteries.
How do I get my projector to show the screen?
You can project a mirror image of what is on your computer screen, or extend your desktop screen to the projected image.
- Hold down the Windows logo key on the keyboard.
- Press “P” to bring up the projector screen.
- Click “Duplicate” to share the image on the computer screen and projector.
