Contributing

How do I default a yealink W52P?

author 0

How do I default a yealink W52P?

To reset the base station via the handset:

  1. Press to enter the main menu.
  2. Select Settings>System Settings>Base Reset.
  3. Enter the system PIN (default: 0000), and then press the Done soft key.
  4. Highlight Reset to factory, and then press the OK soft key.
  5. The resetting process may take a few minutes.

How do I log into my Yealink phone?

How to login to the Yealink web interface Print

  1. Get the IP address from the phone and enter the IP address into a web browser. You will need to the enter the IP address into the web browser – this should take you to the login screen.
  2. For the username enter ‘admin’
  3. For the password enter ‘admin’

How do I connect yealink to W52P?

Procedure

  1. When the handset LCD screen prompts “Press base paging 2s then press Reg.”, long press the Wireless button.
  2. Press the OK soft key on the handset.
  3. Select Register Handset.
  4. Select the desired base and then press the OK soft key.
  5. Press the OK soft key after searching a base successfully.

How do I connect my yealink to my W52P?

Starts here1:13Handset Registration W52P – YouTubeYouTube

What is the Yealink default password?

admin
Open your Internet browser. Navigate to the IP address of the Yealink phone in your browser, and then press ‘Enter’ to search. Enter the username (default: admin) and password (default: admin) on the login page and click ‘Login’.

How do I log into my yealink W52P?

Yealink W52p Setup Guide

  1. To find the IP address of the Yealink W52p base:
  2. Make sure that your computer is connected to the same network and then enter that IP address in your computer’s web browser address bar.
  3. You should then see the Yealink login page, the default username is admin and default password is admin.

How do I set up W52P?

Configuration

  1. In your web browser, type in the IP address of your DECT base station.
  2. Click on the Account tab.
  3. Select Account 1.
  4. Click Confirm at the bottom of the page.
  5. Click the Phone tab at the top.
  6. Select Great Britain under Select Country.
  7. At the bottom, click Confirm.
  8. Once rebooted, test making a call.

How do I Reset my Yealink w52p to factory settings?

Factory reset Yealink W52P (MANUALLY) Power off the unit – if powered by PoE this might mean unplugging the network cable. Wait 15 seconds. Press and hold the connect button on the base station. Reconnect the power. Wait until all 3 status lights are on, showing solid green. Release the button and wait 5 minutes.

How do I set up my Yealink router?

We recommend that you read each step through in its entirety before performing the action indicated in the step. Connect your router with the supplied Ethernet network cable to the ethernet port found on the Yealink’s base station. Then plug the supplied power cable into the base station.

How do I reset the Yealink DECT base station to default settings?

You can reset the Yealink DECT Base Station to the Factory Defaults by using Agent Console or through the physical base. Learn more here. Reset Yealink DECT Base Station to Factory Defaults using the GUI or through the physical base

How do I find the firmware version of my Yealink phone model?

To find out the firmware version of your Yealink phone model open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22. Login to phone web administration interface with your username and password.

author

Back to Top