How do I fix the error code e01 f09 on my Whirlpool Duet washer?
How do I fix the error code e01 f09 on my Whirlpool Duet washer?
1 – You may have a drain hose that is bent and not letting the water drain out – Check the back of the washer. 2 – Be certain the drain hose height does not exceed 96″ or the washer cannot drain properly. 3 – Clean the drain pump filter on the bottom front of the washer of any particles or objects.
What does code F9 mean on a Whirlpool washer?
A Whirlpool washer E1 or F9 error code (FP with some models) means that the washer is taking too long to drain (typically, over 8 minutes). If it is not the drain hose or detergent, your washer most likely has a clogged filter, defective drain pump or pressure switch, or loose wiring.
What does F9 mean on front load washer?
F9 E1 Code in the display: This error code indicates that drain times are longer than expected, typically over eight (8) minutes.
Why is my washing machine saying E01?
E01 – there’s an issue with the lock, its wiring or connection to the control board. Check the door is closed properly and the wiring is intact.
How do you manually unlock a Whirlpool washer?
Press the “Drain and Spin” button on the washer’s control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock.
What does E9 mean on my washing machine?
E9 is a prompt alarm, which only appears during the operation of program “Wash and Dry”. E9 indicates that the load exceeds the rated capacity or clothes are close to the inner cylinder wall before drying.
What does E1 and F6 mean on a Whirlpool washing machine?
F6 E1 – Serial Communication Error The communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
How do you run a diagnostic on a Whirlpool Duet washer?
Whirlpool Duet Diagnostic Test Mode Close the washer door. Select any one key except “Stop/Cancel” and Control Lock. If you got it right all the lights on the Duet washer’s control should light up, and any error codes in the washer’s memory will be displayed.
What is a F21 error on Whirlpool washer?
If your Whirlpool washer is showing an F21 error code, this means that your washer is unable to drain properly. This can be caused by a clogged pipe, a faulty drain pump, or something simpler.
What does E9 mean on washing machine?
Cause: E9 is a prompt alarm, which only appears during the operation of program “Wash and Dry”. E9 indicates that the load exceeds the rated capacity or clothes are close to the inner cylinder wall before drying.
What does F09 mean on a whirlpool duet washer?
The Whirlpool Duet Washer F09 Error is a overflow condition error. It means the overflow contacts on the water level pressure switch have been closed for more than 60 seconds. When this error occurs the central control unit will turn the drain pump on indefinitely as a safety precaution to keep the washer from flooding your home.
Do Whirlpool duet washers have a vent?
Whirlpool has made big improvements with the new Duet washers to reduce odors with an improved venting system. Hoverer, the clean washer cycle is there for a reason! Your washer can get extremely nasty inside in places you can’t see.
Is the Whirlpool duet front load washer being discontinued?
Mariette Mifflin is a writer with more than 10 years of experience covering housewares and appliances. Whirlpool’s earlier Duet (Sport) WFW8500S Washer has been discontinued and has been replaced with a line of Duet front load washers.
How do I unlock the door on my Whirlpool duet washing machine?
The door of the Whirlpool Duet washing machine will lock and unlock automatically based on a number of preset conditions. If the appliance determines a problem with the system or a mechanical failure occurs, the door will not unlock automatically. You can manually unlock the door. Unplug the power cord of the washer from the outlet.
