How do I fix the error your dimm1 and dimm2 module organization is not the same?

How do I fix the error your dimm1 and dimm2 module organization is not the same?

Take the battery out, remove the ram module/s, boot the laptop with modules taken out. Remove the power cord, insert the ram module again, insert the battery and boot again. This time the error is gone and the laptop boots fine again.

What is dimm1 and dimm2 module is not equal?

Yes DIMM 1 and 2 are your 2 RAM slots, the error message is generic and is basically saying that the RAM sticks do not match OR one of the RAM sticks is broken. A bad RAM stick may cause problems with your laptop unrelated to the original issue including charging issues.

What is a dimm1?

DIMM (dual in-line memory module) is a type of computer memory that is natively 64 bits, enabling fast data transfer. DIMM is a module that contains one or several random access memory (RAM) chips on a small circuit board with pins that connect it to the computer motherboard.

What is a dimm2?

The DIMM. 2 card is a riser designed to decongest the crowded motherboard that has no room for M. 2 slots. The DIMM. 2 accessory is a PCB with two 32 Gb/s M.

What is DDR dimm2?

Currently there are two standards for these various DIMM types: DDR (Double Data Rate) and DDR2 (Double Data Rate2). Though DDR2 modules have the same basic dimensions as DDR modules, they have different voltages and pin configurations.

Is DIMM and DDR4 the same?

Physically, a DDR4 module, or dual in-line memory module (DIMM), looks very similar to a DDR3 DIMM. However, DDR4 has 288 pins compared with DDR3’s 240 pins; DDR4 SO-DIMMS have 260 pins instead of 204 in DDR3. This design also lowers insertion force, as not all pins are engaged at the same time during module insertion.

Can you dual channel with 2 DIMM slots?

2 slots will run in dual channel mode if you populate each slot with a ram stick. You can buy a second 4gb stick that has the same specs and it is likely to work properly. If you require a guarantee, buy a matched 2 stick kit of supported ram.

What is the difference between DDR3 and DDR3L?

The main difference between DDR3 and DDR3L is in the voltage specification. Voltage specification for DDR3 is 1.5V, but the voltage for DDR3L is less, which is 1.35V. The letter L in DDR3L refers to low voltage standard. Because DDR3L needs lesser voltage, it consumes less power and generates less heat.

What is SO-DIMM vs DIMM?

A Registered DIMM is a memory module designed for network servers and high end workstations. A SODIMM (Small Outline Dual In-line Memory Module) is a memory module with a smaller outline and thickness than standard DIMM modules and designed primarily for notebook computers.