Popular guidelines

How do I get rid of the Replace drum message on my Brother printer?

author 0

How do I get rid of the Replace drum message on my Brother printer?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

How do you reset change drum soon on Brother?

To reset the drum counter follow these steps:

  1. Open the front cover.
  2. Press the CLEAR key.
  3. Press 1 to reset.
  4. Close the front cover, pressing firmly on each side until they click into place.

Why does my printer keep saying replace drum?

Without a chip, your drum unit has no way of being able to associate itself with your Brother printer. As a result, you will get the “Replace Drum” message because your printer thinks that you’ve not installed a drum unit. On the right is a standard toner cartridge with a chip.

What is the life of a Brother printer?

The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.

How do you reset the drum on a Brother printer HL l2375dw?

Reset the Drum Counter

  1. Make sure the machine is turned on.
  2. Close the front cover.
  3. Press OK and the Up arrow key at the same time.
  4. Press OK to select Drum.
  5. Press the Down arrow key to reset the drum counter.

How do you reset brother printer drum?

Reset Brother DR420 drum unit life on Brother printers. For HL printers: Change the drum, keep the front door open while the printer is on; Press and hold the “GO” button until all lights are lit; Once all light are lit, release the “GO” button and close the front door; Make sure the drum light is off; The counter is reset.

How do you reset brother printer?

Method 1: Turn the Brother printer off and then wait for a few minutes. Open your printer’s cover by either lifting it or lifting a lever on the side. Press the “Cancel” and “Print” buttons at the same time on the printer and then press the “+” button. Press the “OK” or “Enter” key to complete the reset option.

How to reset brother drum?

Close the front cover.

  • Make sure the machine is turned on.
  • Press (Settings).
  • If your machine displays the All Settings menu on the Home screen, skip the Settings menu.
  • Press All Settings. (This step might be skipped in some models.)
  • Choose Machine Info. or Machine Information => Parts Life.
  • Press and hold Drum or Drum Life until the machine’s display message changes.

    • How do you reset brother drum?

    To reset the drum counter on a BROTHER MFC-8950DW open the front cover, press the start ‘*’ button on the keypad, the screen will show the reset menu, click drum, click yes, and you will get a message on screen accepted. The procedure listed in the brother manual for this machine is wrong and does not work.

    author

    Back to Top