How do I identify a Ford 460 block?
How do I identify a Ford 460 block?
460 I.D. Ford placed stickers on the valve covers identifying the engine as a 460. If the sticker is gone, or the covers have been replaced, look for a metal tag with engine identification attached to either the intake manifold in front of the carburetor, or to the ignition coil on the front of the engine.
What block is a 460?
What Is a Big-Block 460? The Ford 460ci 385-series big-block—also named the “Lima” engine after the original city of its manufacture in Ohio—began in passenger carsand found its way into the Thunderbird starting around 1968 as a smaller 429ci unit and into the Lincoln Mark III as a 460.
How many horsepower does a 460 Ford Motor have?
575 horsepower
Ford Performance has taken its Boss Block to the max with the biggest small block Windsor crate engine ever – the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track.
How can you tell the difference between a 429 and a 460?
The 429, with less displacement volume, had a shorter stroke length of 3.59, meaning it produced less power per camshaft rotation than the 460, which had a stroke length of 3.85, as mentioned above. The longer stroke produces more power and also allows for more and better high-performance modifications.
How much horsepower can you get out of a 429 Ford?
The power of this engine made it very popular for performance enthusiasts. The 429 Cobra Jet was advertised as having 370 horsepower at 5400 RPM and 450 lbs-ft of torque at 3400 RPM.
Is the Ford 460 the last big block engine?
These two engines proved to be the last of Ford’s V8 big block engines but are still quite popular today among engine enthusiasts. Beginning in 1968, the Ford 460 was manufactured at Ford’s plant in Lima, Ohio.
When did the Ford 460 come out in the US?
It first appeared in 1968 in Fords and Lincolns. Ford 460s were made until 1997, a run of 30 years. The engine was used in tugboat Lincolns up to 1978. Later, it was used in full sized Fords and Mercurys.
How do you identify a Ford 460 engine?
Ford placed stickers on the valve covers identifying the engine as a 460. If the sticker is gone, or the covers have been replaced, look for a metal tag with engine identification attached to either the intake manifold in front of the carburetor, or to the ignition coil on the front of the engine.
What is the stroke and torque of a Ford 460 engine?
The Ford 460 has a 3.85-inch stroke and a rod length of 6.605 inches. This makes the rod length to stroke ratio 1.71:1. The torque specifications for a Ford 460 engine include main caps, which torque to 105 ft-lbs., notes BoxWrench.net. The connecting rod bolts are lubricated with engine oil and torque to 45 ft-lbs.