How do I identify my Casio Edifice?

How do I identify my Casio Edifice?

Look to see if “Casio” appears on the face of the watch. Many replicas will emblazon the watch face with the words G-Shock, Pro Trek, or Pathfinder but will not include the manufacture name of Casio. Check the model number on the back of the watch and on the back of the box that the watch came in.

How do you set a Casio EQ 500?

Use D (+) and B (–) to change the time (hour and minute) setting. – Each press of either button will move the hands (Hour Hand and c Minute Hand) one minute. – Holding down D or B will start high-speed Hour Hand and c Minute Hand movement in the applicable direction. To stop high-speed hand movement, press any button.

How do you set a Casio Edifice watch?

If your Edifice watch has a pull-out crown, it’s easy to change both the date and the time. To change the time, gently pull out the crown for two clicks, then turn the crown and the minute and hour hands will adjust. When the watch is set to the correct time, push the crown back in to resume timekeeping.

Where is Casio watch serial number?

The example shown in this picture illustrates where to find the module number and model number for a typical Casio watch. As you will be able to see, they are both embossed on the rear plate of the watch. The module number is numeric and will normally be 3 or 4 digits located inside a rectangular box.

Where is G-Shock serial number?

How can I find the model number of my G-SHOCK? The model number of your G-SHOCK can be found on the back of the watch and on the packaging.

How do you change the time on a Casio Edifice 5479?

In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. Press C to move the flashing in the sequence shown below to select the other settings. When the setting you want to change is flashing, use B and D to change it as described below.

How do I set the time on my Casio Bluetooth watch?

All settings are clearly explained and understandable.

1. Hold down the (A) button for about two seconds.
2. Press (C) three times so the seconds digits are flashing.
3. Press (D) to reset the seconds count to 00.
4. Press (C) so the hour setting is flashing.
5. Set the date.
6. Press (A) to exit the setting screen.

How do I set the time on my Casio Edifice EQB 501?

Setting up EQB-501

1. Make sure the watch is in the normal timekeeping mode.
2. Once the timekeeping mode has been established, unscrew then pull the crown out to the second click (the full length).
3. Rotate the crown to adjust the minute and hour hands.

How do I reset my Casio Edifice era 500?

1. Before using this guide, we recommend:
2. In the Timekeeping Mode, hold down A until ADJ appears in the upper display.
3. Press C to move the flashing in the sequence shown below to select the other settings.
4. When the timekeeping setting you want to change is flashing, use D and/or B to change it as described below.

How do you sync analog and digital time on Casio Edifice?

You may find after setting the digital timepiece that the analog display does not match. When this occurs, you need to set the analog time. To set the analog time, press the lower left button 6 times. Next, press and hold the upper left button until the digital time starts to blink.