How do I install a USB thermal printer?

How do I install a USB thermal printer?

How to setup a USB thermal printer?

1. Download the latest version of Waiterio:
2. Install, open and login into the Waiterio application.
3. Navigate to the PRINTING tab and click on the button ADD PRINTER.
4. Set the protocol field to ESC POS.
5. Set the connection field to usb.
6. Input a name for your printer.
7. Click on the SAVE button.

How do I add a thermal receipt to my printer in Windows 10?

Receipt Printer installation Windows 10

1. Click Start | Settings to open the settings window.
2. Select Devices.
3. Scroll to the bottom and select Devices and printers.
4. Click Add a printer on the explorer bar.
5. Click The printer that I want isn’t listed.

How do I install my HP a799 printer?

Installing the HP a799

1. Run all Windows Updates.
2. Plug in both the power and USB cables.
3. Download the ‘HP Windows Receipt Printer Driver.zip’ file attached to this article.
4. Right click the downloaded .zip file and extract all contents.
5. Run the setup file.

How do I connect my computer to a receipt printer?

Set Up Receipt Printer on a Windows Computer

1. Plug your receipt printer into a power source.
2. Connect the printer to the computer using a USB cable.
3. Ensure the receipt paper is loaded properly: Up from the bottom, not down from the top.
4. Ensure the receipt paper is the correct type: It must be thermal paper.

How do I download and install Xprinter drivers?

Go to www.usbswiper.com/download and click on the 32-bit link next to Xprinter Drivers link. When asked to Open or Save File, Select Save File and Click OK. Once the download is complete, open the Zip Folder named 58DRVEN V6. 31 from its saved location.

How do I connect to Xprinter?

To install or add a network, wireless, or Bluetooth printer

1. Select the Start button, then select Settings > Devices > Printers & scanners. Open Printers & scanners settings.
2. Select Add a printer or scanner. Wait for it to find nearby printers, then choose the one you want to use, and select Add device.

How do I install Xprinter on my computer?

Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. Select the Start button, then select Settings > Devices > Printers & scanners. Select Add a printer or scanner. Wait for it to find nearby printers, then choose the one you want to use, and select Add device.

How do I set up Xprinter?

1. Xprinter: Thermal Receipt Printer Installation Guide. (Windows 7 64-bit)
2. Step One: Unpacking your Thermal Printer. Unpack your printer and save the packaging materials.
3. Step Two: Connecting your Xprinter Thermal Receipt Printer.
4. Step Three: Installing the Software.
5. Step Four: Add a Printer.

What button on the printer should be pressed after a paper jam or fault condition occurs on the HP receipt printers?

If a paper jam or fault condition occurs, press the reset button to reset the printer.

How do I use a thermal printer on my computer?

Connect Your Hardware

1. Connect the black power cord from the back of the printer (circular with prongs inside) and plug the other end into the wall.
2. Make sure the Power Switch in the front of the printer is in the off position.
3. Plug in the appropriate connection type(s).
4. Put in a roll of paper.
5. Turn the printer on.

How do I use a thermal printer with my laptop?

Windows 7 Printer Setup Guide

1. From the start menu, select Control Panel, Then from “Hardware and Sound” select “View Devices and printers”
2. Your thermal printer should be an unrecognised device, right click it to access the contextual menu.
3. Click the properties button.
4. Click the Change settings button.

Why is my Xprinter not printing?

My printer won’t print Make sure there is paper in the tray(s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.