How do I make my SATA hard drive a primary master?
How do I make my SATA hard drive a primary master?
Set the SATA port as “Enabled” in the BIOS. Then in Windows Disk Management, you can Format the “old” drive (now DISK 1) with NTFS, which will delete all your data on it and it can then be used as a regular data drive.
What is the jumper setting?
Jumpers manually configure computer peripherals, such as the motherboard, hard drives, modems, sound cards, and other components. For example, if your motherboard supported intrusion detection, a jumper can be set to enable or disable this feature.
What are some of the settings that can be configured using jumpers?
What is a jumper setting?
In electronics and particularly computing, a jumper is a short length of conductor used to close, open or bypass part of an electronic circuit. They are typically used to set up or configure printed circuit boards, such as the motherboards of computers. The process of setting a jumper is often called strapping.
What are jumper settings?
How do I make my secondary hard drive primary?
To get change your default hard drive, click Start and then choose Settings (or press Windows+I). In the Settings window, click System. In the System window, choose the Storage tab on the left and then scroll down to the “Save locations” section on the right.
What are Jumper pins on a WD hard drive?
Early 3.5-inch WD drives with Advanced Format supported jumper pins 7 8. Placing a jumper on these pins adjusted the drives internal alignment for single partition XP installations. Support for this jumper setting is no longer needed on newer drives.
What happened to hard disk jumpers?
Hard disk jumpers where a necessary nuisance in the IDE/ (P-)ATA days. Not having the necessary jumper or not knowing their proper placement made the difference between a functional hard drive and one not getting recognized by the computer. Fortunately, jumpers disappear in the S-ATA age.
How do I reduce the size of a WD hard drive?
Jumper Settings for WD SATA and EIDE Hard Drives: If you can’t find a jumper setting that works, then you can cut the capacity of your drive by creating a Host Protected Area (HPA). One suitable tool is HDAT2. Page 5 of the HDAT2 Cook Book explains how to “change the native size” of your HDD.
Why do SATA drives have jumpers?
Early SATA controllers had peculiar ways of functioning so manufacturers implemented failsafe/compatibility options in their later generation drives to make sure these newer drives are still usable on old boards. And they did this – yes! – using jumpers.
