How do I pair my Omaker M4?

How do I pair my Omaker M4?

If not, try holding the power button while turning it on, and not releasing it until the front LED (located within the grill) starts flashing between two colors. Once it is in pairing more, simply find it on you device’s Bluetooth screen. It should show up as Omaker-M4.

Is the Omaker M4 waterproof?

100% Waterproof, even with plenty of diving – The Milemont shower speaker is perfect for water because it is not only waterproof but also fully immersed in water for 3 feet.

How do you pair a rugged Bluetooth speaker?

Activate the Bluetooth function on your device and search Bluetooth devices, then select “onn. Rugged LG GRY” to start connecting. Use a 3.5mm cable (not included) to connect the speaker to another audio source. Press Play on the device and adjust the volume on the unit to obtain the desired volume.

How do you charge a rugged speaker?

Plug the adapter into any wall socket or power strips. The adapter’s dc end can plug into the “DC IN” port on the side of the speaker to charge the speaker. When charging, a red led will illuminate, it will turn off when the speaker is fully charged.

How do I know if my rugged speaker is charging?

The CHARGE indicator lights up in orange while charging. Charging is completed in about four hours*1 and the indicator turns off. If the CHARGE indicator stays turned off when the speaker power is off and connected to an AC outlet, the built-in lithium ion battery is fully charged.

How do I know when my rugged speaker is charged?

How do you reset a Onn rugged Bluetooth speaker?

Press and hold both the power and the “volume down” buttons for around 6 seconds until you hear the device power off. Turn on the speaker and use it as you would a new speaker.

How long does it take to charge an Onn Bluetooth speaker?

It takes approximately three (3) hours for the built-in battery of the Bluetooth® speaker to charge from an empty state.

How do I know my Onn speaker is charging?

Why is my omaker M4 speaker not working?

Wire connections of the speaker connected to the motherboard might be loose inside the device from dropping the device. In this case, follow the Omaker M4 Back Case Replacement guide to disassemble the speaker. Recharge and try again after a full charge. If the problem persists, reboot the device by turning it off and on.

How do I clean the omaker M4 front cover?

View the Omaker M4 Front Case Replacement guide for details on how to remove the front cover. Use a dry cloth and carefully wipe the cone. Use a wet wipe to clean the interior side of the front cover. You will realize the music will start cutting off when you separate your smart phone or device from the speaker for a distance of 9 to 10 meters .

How far away from the source should the Speaker be?

Ensure that the speaker is no more than 30 feet (9 meters) away from the source. Ensure there are no obstacles (e.g wall) between the speaker and the source. Wire connections of the speaker connected to the motherboard might be loose inside the device from dropping the device.